Cart 2 india

Specification
Brand : OUCRIY
BulletPoint1 : Widely used in the chemical, construction, plumbing, oil, coal, metallurgy, shipbuilding and other industries.
BulletPoint2 : Premium Material The manual hydraulic test pump is made of high quality iron material with surface spray treatment, proof and , and long service life.
BulletPoint3 : Quality Service We strive to provide you with high quality and convenient service. You are welcome to us if you have any problem about our product, we will give you a satisfactory reply.
BulletPoint4 : WIDELY USED :Widely used in chemical industry, construction, plumbing, oil, coal, metallurgy, shipbuilding and other industries.
BulletPoint5 : Widely used in chemical industry, construction, plumbing, oil, coal, metallurgy, shipbuilding and other industries.
ExternallyAssignedProductIdentifier1 : 0055964126372
ExternallyAssignedProductIdentifier2 : 055964126372
Hazmat1 : 1
ItemName : Manual Pressure Test Pump - 1000PSI 7MPa Manual Hydraulic Test Pump Pipe Valve Water Pressure Tester Hand Tool
ItemPackageDimensions_Height : 21 centimeters
ItemPackageDimensions_Length : 33 centimeters
ItemPackageDimensions_Width : 25 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-pumps
Manufacturer : OUCRIY
Material : Plastic
ModelName : OUCRIYb16twco5a0
ModelNumber : OUCRIYb16twco5a0
NumberOfItems : 1
PartNumber : OUCRIYb16twco5a0
ProductDescription :






Specification:
Item Type: Manual Pressure Test Pump
Maximum Testing Pressure: 1000PSI / 7MPa

Instructions:
1. Install the machine and secure the pump body to the water tank with four screws.
2. Install the water pipe and connect it to the pump body (Note:seal connection, add washer, you can also use PTFE tape, otherwise it is easy to leak)
3. Connect the other end of the outlet hose to the tested pipe
4. Fill the test tube with water, vent the air, and then close the pressure relief valve.
5. Fill the water tank with water, then rock the handle up and down to start the pressure test.
6. When the pressure gauge rises to the required pressure, the pressure can be stopped (normal tap water pressure is 0.3Mpa, high-rise residential building water pressure is 0.4Mpa, water pipe pressure test is generally pressurized to 0.8-1Mpa, 0.1Mpa is equivalent to 1kg pressure)
7. After stopping the back pressure, if the indicated pressure does not drop, it can be proved that the pressure of the pipe is good. On the contrary, it can be proved that the sealing performance of the sealed tube was not good, and there exists a leakage that has caused a pressure drop.

Package List:
1 x Pump
1 x Handle(Random Type)
1 x Water Pipe(Random Color)
5 x Seal Ring
1 x User Manual


Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

ProductSiteLaunchDate : 2024-09-22T17:07:51.607Z
SafetyDataSheetUrl : 1
SupplierDeclaredDgHzRegulation : transportation
UnitCount : 1
UnspscCode : 41110000
WarrantyDescription : Lifetime Warranty