Cart 2 india

Specification
AutoPartPosition : front
BatteriesRequired : 1
Brand : Zopsc
BulletPoint : Suntec A2RA-7720 Waste Oil Pump 0
BulletPoint1 : The outside box is made of high quality aluminum material, which is more
BulletPoint2 : Large dial, for clear reading, fashionable and generous
BulletPoint3 : Suitable for water, or hydraulic oil as a medium, for a variety of pressure vessels, pipes, valves and other pressure test
BulletPoint4 : Application: Normal tap water pressure of 0.3MPa, high-rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa. (Tap water 0.1MPa 1KG pressure)
BulletPoint5 : This is easy to install and use
Color : Yellow
ExternallyAssignedProductIdentifier1 : 713136001710
ExternallyAssignedProductIdentifier2 : 0713136001710
ExternallyAssignedProductIdentifier3 : 00713136001710
FitType : Universal Fit
GpsrSafetyAttestation : 1
IncludedComponents : Hydraulic Reversing Pump, Type 1, 12V
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 9 inches
ItemDisplayDimensions_Width : 5 inches
ItemDisplayWeight : 5.6 pounds
ItemName : Hydrostatic Test Pump 2.5Mpa 25KG 13ml / time Manual Hydraulic Water Pressure Test Pump for Pipeline Pressure Test
ItemPackageDimensions_Height : 30.7086 centimeters
ItemPackageDimensions_Length : 11.303 centimeters
ItemPackageDimensions_Width : 18.6944 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-pumps
Manufacturer : Zopsc
Material : Aluminum
MaximumFlowRate : 0.29 gallons_per_minute
ModelName : M81120
ModelNumber : Zopscrosga5g1yq
NationalStockNumber : 4320-01-549-8863
NumberOfItems : 1
OperationMode : Manual
PackageLevel : unit
PartNumber : Zopscrosga5g1yq
PowerSourceType : hydraulic-powered
ProductDescription : Specification:
Features:
The outside box is made of high quality aluminum material, which is more
Large dial, for clear reading, fashionable and generous.
Suitable for water, or hydraulic oil as a medium, for a variety of pressure vessels, pipes, valves and other pressure test
Application: Normal tap water pressure of 0.3MPa, high-rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa. (Tap water 0.1MPa 1KG pressure)
This is easy to install and use.
Specifications:
Material: aluminum
Pressure column outer diameter: 2.8cm / 1.10in
Pressure: 2.5MPa
: 13ml / time
Color: Yellow
Weight: 2090g
How to use? (Instructions)
1. Connect the water hose to the water pipe
2. Close the switch when the pipe is filled with water and the air is discharged
3. Fill the with water, and then tilt the plate up and down, began to test pressure
4. When the pressure gauge readings rise to the need for pressure, you can stop the pressure;
5. After stopping the pressure, if the pressure gauge does not drop on the pressure gauge, it can prove that the pipe pressure performance is good, on the contrary, it proves that the measured pipe sealing performance is not good,
The specific steps of the test pressure are as follows:
1. The hot and cold water pipes connected together with the hot and cold water to form a circle, into a tube, and test the pump connected to any one outlet can be the pressure pointer is 0 pressure. When all the water pipes are fully welded before they can test pressure, in the pressure before the closure of all the plug, close the water inlet valve.
2. When measuring pressure, shake the jack until the pressure gauge pointer to 0.9-1.0 or so, that is the current pressure is 3 times the normal water pressure
3. Keep this pressure for a certain amount of time. Different water pressure measurement time is not the same, PPR,
ProductSiteLaunchDate : 2019-09-06T00:00:00.000Z
Size : One Size
SkipOffer : 1
SpecificUsesForProduct : personal
Style : Above Ground
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40151500
Voltage : 12 volts