Cart 2 india

Specification
Brand : kitneed
BulletPoint1 : Stable and Efficient: The hydraulic electric pump is equipped with a powerful 12V DC motor for stable performance and quick start-up. So, It can provide strong power for hydraulic systems such as car elevators and lifters to achieve short-term lifting, greatly improving working efficiency.
BulletPoint2 : High Performance: It is a double-acting pump, which can be used to lift and lower the hydraulic system to effectively handle a lot of work. The volume is low when it operates, giving you a quiet and comfortable working environment.
BulletPoint3 : Safety Protection: It is equipped with an overflow valve, so it will automatically release when overpressure to avoid overpressure damage or excessive pressure, making it safe and reliable to use.
BulletPoint4 : Compact and Lightweight: It is compact and lightweight(31.96lbs), allowing it to be easily installed on electric basketball stands, snow sweepers, truck tailgates, etc. without being abrupt, and also making it easy to carry and move.
BulletPoint5 : Easy to Use: This hydraulic electric pump can be used directly after receiving without additional assembly requirements. At the same time, the English operating instructions are also provided in the package to facilitate your operation and installation.
Color : Black, Silver
IncludedComponents : 1* Hydraulic Electric Pump 1.* 4.5-meter Wired Control Handle 1* Connector 1* English User Manual
ItemName : Hydraulic Power Unit Double Acting Hydraulic Pump Steel Portable Low Noise Dump Trailer Car Lifting Power Kit 3000W Motor 20 Quart 12V DC (Steel Double Acting 20Quart)
ItemPackageDimensions_Height : 11.02 inches
ItemPackageDimensions_Length : 25.59 inches
ItemPackageDimensions_Width : 11.02 inches
ItemTypeKeyword : hydraulic-pumps
Material : Steel Double Acting 20Quart
NumberOfItems : 1
ProductDescription :

Description

This hydraulic pump is made of solid steel, which is not easy to crack or damage. It is equipped with a 3kw powerful motor, with a release pressure of up to 16MPa, making it easy to handle various hydraulic lifting operations.

Specifications

Material: Steel

Color: Black, Silver

Type: Horizontal

Rated Speed: 2850R/MIN

Internal Thread Model: m14 * 1.5

Connector Model Configured: 18 * 1.5

Connector Model Additionally Configured in the Package: 9/16''(SAE6)

Power: 3KW

Voltage: DC12V

Tank Capacity: 18.9L/ 20Qt

Cord Length: 4.5m/14.76ft

Release Pressure: 16MPa

Recommended Hydraulic Oil: ISO VG22-46 (0 ℃ - 70 ℃): ISO VG15 (- 15 ℃ - 0 ℃)

Tolerance Range of Power Supply Voltage: ± 10%

Packing Size: 65*28*28cm/25.59*11.02*11.02in

Product Size: 63*26*30cm/24.8*10.23*11.81in

Gross Weight: 17kg/37.78lbs

Package Included

1* Hydraulic Electric Pump

1* Connector

1.* 4.5-meter Wired Control Handle

1* English User Manual

Notes

1.The hydraulic oil should be replaced upon working for 100 hours since the initial filling. Subsequently, the hydraulic oil should be replaced once per year/ about 1500 working hours.

2.The power unit could not filter foreign materials within the hydraulic cylinder, therefore, the interior of the hydraulic cylinder must be kept clean to prevent the ill-function of the control valve. And the pipelines should also keep clean.

3.The oil filling volume of the oil tank shall be 90% of the capacity, and the oil volume shall not be less than 85%. When starting the operating system for the first time, immediately check whether the oil in the oil tank is sufficient.

4.Please note that the cleanliness level of hydraulic oil is ISO 4006 (: 99) 18/15 or NAS1638 9~10, and the product oil must pass 10-25 μm The oil filter truck can be used as working oil after filtering.

5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

ProductSiteLaunchDate : 2024-11-07T04:12:41.081Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 24101600