Cart 2 india

Specification
AutoPartPosition : rear
Brand : ATO.COM
BulletPoint : Made in United States
BulletPoint1 : Pressure test pump with 1.6, 2.5, 4, 6.3, 10, 16, 25 and 40 MPa working pressure. Semi enclosed or fully enclosed water tank can be chosen.
BulletPoint2 : Engineered with a copper water pump body and a stainless steel circular arc water tank, this hydrostatic hand pump tester is built to last, resistant to rust and corrosion, ensuring a long service life.
BulletPoint3 : Equipped with a large and clear glycerin-filled pressure gauge, this tester provides convenient and accurate readings, making it easy for operators to monitor pressure levels.
BulletPoint4 : Hydraulic test pump is used in pressure testing for various pressure vessels, valves, pipelines, rubber pipe fittings and steam boilers. It can also be used as equipment to provide high pressure liquid sources in various laboratories.
BulletPoint5 : Features a lubricated pump plunger and an ergonomic foam grip, allowing for simple and comfortable operation. The foam grip provides a secure and slip-resistant handle, enhancing user experience and efficiency.
Color : 16 MPa (2321 psi)
ExternallyAssignedProductIdentifier1 : 0703205829031
ExternallyAssignedProductIdentifier2 : 703205829031
FitType : Vehicle Specific Fit
IncludedComponents : 1*hydraulic test pump
ItemName : ATO Hydraulic Test Pumps, with Optional Semi- or Fully Enclosed Tanks, Manual Test Pumps to Provide a High Pressure Source of Fluid for the Workshop, for Pipework Pressure Vessels. (16 MPa (2321 psi))
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 13 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-pumps
Manufacturer : ATO
Material : polypropylene
Material1 : acetal
Material2 : neoprene
ModelName : Hydrostatic Pump Tester
ModelNumber : ATO-MPTP-SB
NumberOfItems : 1
OperationMode : Hydraulic
PartNumber : P0007P-NTTPT5-AB
ProductDescription :

High quality pressure test pump . Manual pressure test pump is a type of hydraulic pump. 2.5 MPa, 4.0 MPa and 6.3 MPa working pressure is provided in our website. Manual pressure test pump with 13mL water absorption frequency and 4.5L water tank.Hydraulic test pump is used in pressure testing for various pressure vessels, valves, pipelines, rubber pipe fittings and steam boilers. It can also be used as equipment to provide high pressure liquid sources in various laboratories.

Manual Pressure Test Pump Operation Steps:

Assemble the pressure test pump, check whether the main body and accessories are complete.

Connect one end of oil tube to pump body. (Pay attention to seal connection and add gaskets, otherwise water will leak)

Connect the other end of oil tube to the pipeline to be tested. (Be sure to wrap it with PTFE TAPE)

Fill the tested pipe with water, exhaust air, then close the pressure relief valve.

Fill the water tank with water, then press the handle rod up and down to start pressure test and pressurization.

Manual pressure test pump small volume, light weight, convenient transportation, simple operation, easy to use, simple maintenance, widely used in coal, metallurgy, petrochemical, electric power, machinery and other industries, is a simple and convenient hydraulic power source.

ProductSiteLaunchDate : 2024-07-02T10:00:54.984Z
Style : Diaphragm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 30000000