Cart 2 india

Specification
Brand : DASBET
BulletPoint : MELLING ENGINE PRODUCTS PT13 TOOL PRIMING
BulletPoint1 : Versatile Pulley Removal & Installation: Ideal for removing and installing press-fit alternators, power steering pumps, and various pulleys.
BulletPoint2 : Durable Construction: Built from premium carbon steel, the pulley puller and installer tools are drop-forged, blackened and heat-treated for corrosion-resistant, ensuring reliability and long-term durability.
BulletPoint3 : Easy to Use: Featuring reversible split jaws for easy access to pulley flanges, this power steering pulley puller installer kit is designed for intuitive operation, providing adaptability for various automotive tasks.
BulletPoint4 : Function: The power steering pump pulley removal and installation kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16 or 1-3/8 inch hub diameter.
BulletPoint5 : Wide Application: Compatible with GM, Ford, and Chrysler engines, this alternator AC pulley puller & installer tool includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines.
BulletPoint6 : Tips: if you try the 3-jaw puller is not fit you car, you need replace another 3 jaw
Color : Silver, Blue
ExternallyAssignedProductIdentifier1 : 729295115731
ExternallyAssignedProductIdentifier2 : 0729295115731
ExternallyAssignedProductIdentifier3 : 00729295115731
FinishType : Polished
FitType : Vehicle Specific
IncludedComponents : Power Steering Pulley Puller Installer Kit
ItemLength : 8.625 inches
ItemName : DASBET Power Steering Pulley Puller Installer Kit | 12PCS Alternator AC Pulley Puller & Installer for Water Pump, Vacuum Pump, Alternator Pulleys and Most Engines with Storage Case
ItemPackageDimensions_Height : 21.6916 centimeters
ItemPackageDimensions_Length : 4.9022 centimeters
ItemPackageDimensions_Width : 11.9126 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-pulley-tools
Manufacturer : DASBET
Material : Stainless Steel
ModelName : Power Steering Pulley Puller Installer Kit
ModelNumber : ZTC-0103-01
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfTeeth : 24
OeManufacturer : Melling
OemEquivalentPartNumber : PT13
OperationMode : Mechanical
PartNumber : ZTC-0103-01
PartTypeId : 14827
ProductDescription :
DASBET Power Steering Pulley Puller Installer Kit

Packing List:

1 x Puller Body
1 x Jaw & Sleeve Assembly (3pc)
1 x Jackscrew
1 x Button
1 x Bearing
1 x Thrust Washer
1 x Puller Pin For Quad 4
1 x Screw Installer for Quad 4
1 x Puller Pin For G.M. 3.1
1 x Screw Installer for G.M. 3.1
1 x Screw Installer for Ford 4.6
1 x Modular Screw Installer for All Others
1 x Storage Case

How to Use:

Removal:
1. Combine the center screw and the puller body, with both hex ends in the same direction
2. Fit the center screw button, or one of the puller pin/screw installer (if required) in to the open end of center screw
3. Set the larger flange puller body into the pulley hub
4. Place two halves of the jaw & sleeve assembly around the hub and the flange. Slide in the sleeve around two halves to secure its position.
5. Use your wrench to hold the puller body steady while turning the center screw inward by electrical drill.

Installation:
1. Lubricate the center screw. Thread the required puller pin/screw installer into the center screw.
2. Combine the center screw and the puller body, with both hex ends in the same direction.
3. Slide the bearing and washer over the puller body.
4. Thread the assemply into the end of the pulley shaft, with bearing against the pulley face. Tighten the center screw to finish installation.

ProductSiteLaunchDate : 2024-08-30T21:30:46.394Z
Size : 15.35x11.81x5.12in
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 264
UnspscCode : 24101600
WarrantyDescription : 6 MONTHS