Cart 2 india

Specification
Brand : TFCFL
BulletPoint1 : ➤High Durability: This hydraulic cylinder liner puller is made of #45 steel which has good corrosion and wear resistance, so it is more durable and can be used for a long time.
BulletPoint2 : ➤Ergonomically Designed: Compared with the traditional one, this cylinder liner puller is ergonomically designed with a press rod, which is more labor-saving and facilitates your use during operation.
BulletPoint3 : ➤High Efficiency &Compatability: With a maximum pulling force of 15T, even ultra-thin walls can be pulled out easily. This cylinder liner puller is suitable for any model with cylinder liner bore between 80-135mm. At the same time, both dry and wet types can be used.
BulletPoint4 : ➤Easy Operate & Install: This hydraulic cylinder tool is easy to operate without much effort, saving your time and energy. You can easily install it without much effort and time because of its simple structure.
BulletPoint5 : ➤Wide Application: This cylinder liner puller is used for the disassembly of the internal combustion engine and cylinder liner. It is suitable for any model with the inner diameter of the cylinder liner between 80-135mm.
ExternallyAssignedProductIdentifier : 7679125650280
FitType : Universal
FitType1 : Universal
FitType2 : Universal
IncludedComponents : 1* Cylinder Puller, Other Accessories for Use
ItemName : TFCFL 15T Hydraulic Cylinder Liner Puller, Universal Hydraulic Cylinder Puller for Hubs Fit Diameter of 80mm-135 mm, Universal Cylinder Liner Puller Tool Set for Auto Repair
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 33 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-puller-sets
Manufacturer : TFCFL
ModelName : Keenso31bfx0gth4
ModelNumber : Keenso31bfx0gth4
NumberOfItems : 1
PartNumber : Cylinder Puller
ProductDescription :

Details

#45 Steel Material: This cylinder liner puller is made of #45 steel which has good corrosion and wear resistance, so it is more durable and can be used for a long time.

Adjustable Cylinder Diameter: There is a screw at the bottom of the cylinder liner puller used to adjust the cylinder diameter, so you can adjust it according to your own needs.

 

Application

It is used for the disassembly of the internal combustion engine and cylinder liner. It is suitable for any model with the inner diameter of the cylinder liner between 80-135mm.

 

How to Use

1. According to the model you need to disassemble, choose the pull plate and connecting rod (the connecting rod is divided into two lengths).

2. Connect the connecting rod with the cylinder lifter, the steering knuckle and the pull plate.

3. Twist the steering knuckle of the cylinder puller to a right angle with the connecting rod. The straight side of the pull plate is parallel to the connecting rod and passes through the cylinder liner so that the small diameter of the pull plate is locked into the inner diameter of the cylinder liner.

4. Sleeve the two support tubes onto the diagonal cylinder head screws.

5. Pass the beam of the cylinder puller into the slideway of the lifting gear, and put both ends of the beam into the groove of the support tube.

6. Screw the hydraulic assembly into the lifting gear (pay attention to the center hole on the beam) and tighten it.

7. Check whether the pull plate, beam and support tube are accurately positioned.

8. Transport the small plug of the hydraulic assembly with a pressure rod, and the cylinder sleeve can be pulled out smoothly.

 

Specification

Max. Pulling Force: 15T

Material: #45 Steel

Maximum Stroke (Piston Push Rod): 5cm/1.97in

Weight: 18kg/39.68lbs

 

Package Included

1* Cylinder Puller

Other Accessories for Use

 

Notes

1. The extension of the cylinder push rod must not exceed 50mm.

ProductSiteLaunchDate : 2024-04-12T03:06:19.614Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1