Cart 2 india

Specification
Brand : REHOUPTU
BulletPoint1 : 【High Efficiency and Durability】: It has a maximum pulling force of 15T, even the ultra-thin wall can also be easily pulled out. This professional cylinder liner puller is made of #45 steel, so it is more durable and can be used for a long time.
BulletPoint2 : 【Excellent Design】: Compared with the traditional one, this heavy duty cylinder liner puller is designed with a press rod, which is more labor-saving and facilitates your use during operation.
BulletPoint3 : 【High Compatibility】: This high-quality cylinder liner puller is suitable for any model with the inner diameter of the cylinder liner between 80-135mm. Meanwhile, both dry and wet types can be used.
BulletPoint4 : 【Easy Operate and Install】: This advanced cylinder liner puller is easy to operate without much effort, saving your time and energy. You can easily install it without much effort and time because of its simple structure
BulletPoint5 : 【Wide Application】: This efficient cylinder liner puller is used for the disassembly of the internal combustion engine and cylinder liner. It is suitable for any model with the inner diameter of the cylinder liner between 80-135mm.
ExternallyAssignedProductIdentifier1 : 0763114570868
ExternallyAssignedProductIdentifier2 : 763114570868
IncludedComponents : 1* Cylinder Puller Other Accessories for Use
IsAssemblyRequired : 1
ItemDisplayWeight : 0.4 kilograms
ItemName : REHOUPTU Cylinder Liner Puller, Hydraulic Cylinder Liner Puller Both Dry-Type and Wet-Type, Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for Repair and Disassembly
ItemPackageDimensions_Height : 1.97 inches
ItemPackageDimensions_Length : 7.09 inches
ItemPackageDimensions_Width : 9.06 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-puller-sets
Manufacturer : ReGeJiY
ModelName : Cylinder Liner Puller
ModelNumber : OT-MLLCR-2869
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : OT-MLLCR-2869
ProductDescription :

Details

#45 Steel Material: This cylinder liner puller is made of #45 steel, so it is more durable and can be used for a long time.

Adjustable Cylinder Diameter: There is a screw at the bottom of the cylinder liner puller used to adjust the cylinder diameter.

Application

It is used for the disassembly of the internal combustion engine and cylinder liner. It is suitable for any model with the inner diameter of the cylinder liner between 80-135mm.

How to Use

1. According to the model you need to disassemble, choose the pull plate and connecting rod (the connecting rod is divided into two lengths).

2. Connect the connecting rod with the cylinder lifter, the steering knuckle and the pull plate.

3. Twist the steering knuckle of the cylinder puller to a right angle with the connecting rod. The straight side of the pull plate is parallel to the connecting rod and passes through the cylinder liner so that the small diameter of the pull plate is locked into the inner diameter of the cylinder liner.

4. Sleeve the two support tubes onto the diagonal cylinder head screws.

5. Pass the beam of the cylinder puller into the slideway of the lifting gear, and put both ends of the beam into the groove of the support tube.

6. Screw the hydraulic assembly into the lifting gear (pay attention to the center hole on the beam) and tighten it.

7. Check whether the pull plate, beam and support tube are accurately positioned.

8. Transport the small plug of the hydraulic assembly with a pressure rod, and the cylinder sleeve can be pulled out smoothly.

Specification

Max. Pulling Force: 15T

Material: #45 Steel

Maximum Stroke (Piston Push Rod): 5cm/1.97in

Weight: 18kg/39.68lbs

Package Included

1* Cylinder Puller

Other Accessories for Use

ProductSiteLaunchDate : 2019-10-05T06:00:46.149Z
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
WarrantyDescription : No