Specification BaseType : Legs Brand : ARC-POWER BulletPoint1 : 1.Our product is suitable for disassembling various bearings, motor couplings, and gears. The whole is forged with high carbon steel, and after heat treatment and surface phosphating treatment, it is not easy to rust, wear, and corrosion. BulletPoint2 : 2. The screw rod adopts a T-shaped thread, which is not easily damaged, has high strength, and has a long service life of the thread. The top of the screw rod adopts an external hexagonal design, which can be assisted by a wrench. BulletPoint3 : 3. There are two fixing holes on the thickened pull foot, which can be adjusted according to the actual use process to increase the range of use. BulletPoint4 : 4. It can be assembled into a 2-jaw mode or a 3-jaw mode according to the usage situation. It can effectively pull out bearings and couplings, and can adjust the lead screw, saving time and effort in use. BulletPoint5 : 5. Installation steps: (1) Clip X2 bolt nut X1 pull foot X1 (2) Install clip in the same position hole (3) Assembly of screw rod and screw rod seat (4) Assembly of screw rod seat and pull foot (5) Depending on the usage situation, it can be assembled into 2 claw mode or 3 claw mode. ExternallyAssignedProductIdentifier1 : 0790885628658 ExternallyAssignedProductIdentifier2 : 790885628658 FinishType : Powder Coated FitType : Universal IncludedComponents : Shelves InstallationType : Freestanding ItemName : ARC-POWER for Slide Hammer & Mechanic's Internal Pilot Blind Bearing Puller Set Pulling ItemPackageQuantity : 1 ItemShape : Round ItemTypeKeyword : automotive-puller-sets LoadCapacity : 10.0 tons Manufacturer : ARC-POWER Material : Metal Material1 : Metal Material2 : Carbon Steel MinimumHeight : 5 inches ModelName : FRTY-4503 MountingType : Floor Mount NumberOfShelves : 1 PartNumber : RTY-4503 ProductDescription : For This slide hammer and bearing puller set is designed especially for pilot bearings, needle bearings and other jobs that require an internal puller. The slide hammer features a T-handle for a sure grip when pulling and a chrome plated shaft for smooth operation. This handy bearing puller set is simple to use and comes organized in a convenient carrying case for portability and storage. 3 lb. slide hammer with T-handle for secure grip Chrome-plated shaft for smooth operation Four collets: 3/8" to 1/2", 9/16" to 11/16", 5/8" to 1", 1" to 1-1/4" Blow mold case ProductSiteLaunchDate : 2022-11-07T16:39:59.186Z Size : 20in Style : Modern UnspscCode : 56100000