Cart 2 india

Specification
Brand : Generic
BulletPoint1 : 4. Equipped with a magnifying glass for accurate measurement.
BulletPoint2 : 3. High accuracy engraving technique, clear and standard scales, wear resisting and not easy to fade.
BulletPoint3 : 1. Made of high strength carbon steel, sturdy and .
BulletPoint4 : 5. Suitable for internal and external angle measurement in machining.
BulletPoint5 : 2. 360 degree angle measuring range can meet your most needs..
Color : One Color
ItemName : Generic Smart Single Phase Energy Meter, LCD Display Electric Meter Protractor
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : construction-protractors
Manufacturer : Generic
ModelName : GGCFBRAEE
ModelNumber : GGCFBRAEE
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : GGCFBRAEE
ProductDescription : Generic
Specification:
Item Type: Watt?Hour Meter
Model: D52-2066
Material: ABS
Uses: used in chemical industry, power plants, automation equipment, DOS systems, electromechanical equipment and other places
Measurement Accuracy: 1%±2 Words
Measuring Range: AC Voltage: AC40.0-300.0V, AC Current: AC0-100.0A
Current Display Resolution: 0.01A
Power Frequency: 45.0Hz-65.0Hz
Power Factor: 0.00-1.00PF
Active Power: the measurement range is 0-30000W, the display resolution between 0-9999.9W is 0.1W, and the rest is 1W
Electricity:
0-9999kwh, 0-999.99kwh, the minimum display resolution is 0.01kwh
1000.0-9999.9kwh, the minimum display resolution is 0.1kwh
10000-9999kwh, the minimum resolution is 1kwh
Measurement Speed: about 2 times per second
Installation Method: Rail Type
How to Use:
1. Connect the measured voltage to the 1 and 2 terminals on the bottom left of the meter.
2. The built?in transformer is wired according to the wiring diagram in Figure 1, and the wire of the measurement loop is passed through the hole under the meter. The penetration direction of the wire is arbitrarily selected by the user according to the situation of use. Or penetrate from the circular hole on the top of the meter and come out from the bottom. The different penetration directions will not affect the measurement results.
3. Connect the external transformer according to the wiring diagram in Figure 2, connect the 2 wires of the secondary end of the accurate current transformer with the meter to the 3 and 4 terminals on the upper left of the meter, and pass the wires of the measurement circuit through the mutual inductance. The round hole of the device.
4. The meter displays the measurement parameters after the power is turned on.
5. When it is necessary to reset the energy measurement , press and hold the button on the right side of the instrument panel for 5 seconds
ProductSiteLaunchDate : 2024-10-25T02:51:35.688Z
Size : One Size
UnitCount : 1
UnspscCode : 27111800