Cart 2 india

Specification
Brand : ITACO
BulletPoint1 : For Yamaha Outboard Models: F9, F9.9, F15, F20, 9.9, 15 - 2 or 4 stroke (Year 1996- 2015 later)
BulletPoint2 : Mallory No.: 9-45607, Fit Yamaha 63V-44352-01/02/00
BulletPoint3 : Dimension of Impeller: Outer/External Diameter:52.25 mm , Inner shaft Hub Diamter: 12.86 mm, Height/Depth/Width: 13.86MM, No of Blades: 6
BulletPoint4 : Water Pump Impeller
BulletPoint5 : Boat Motor for Outboard Engine
Color : 63V Impeller
Department : mens
EngineType : 4 Stroke
ExternallyAssignedProductIdentifier1 : 753759217709
ExternallyAssignedProductIdentifier2 : 0753759217709
FitType : Universal Fit
FuelType : Gasoline
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : Great Product
ItemName : New Boat Motor Water Pump Impeller F15-06050000 63V-44352-01 00 15HP Yamaha Outboard F 9 20HP 15HP 9.9HP Sierra 18-3040 Engine
ItemPackageDimensions_Height : 1.524 centimeters
ItemPackageDimensions_Length : 6.096 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : boat-propellers
Manufacturer : ITACO
Material : Plastic
MaximumHorsepower : 15 horsepower
ModelName : 010-12832-00
ModelNumber : 63V-44352-01 00, F15-06050000
MountingType : Transom Mount
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Manual
PackageLevel : unit
PartNumber : 63V-44352-01 00, F15-06050000
Pattern : Solid
ProductDescription : GRONGU MKP-34 prop and nut kit E 1865019 replacement for minn kota shear pin

Package Include
Replacement for minn kota prop include：
2 x 2093101 3/8"-24 Prop Nuts
2 x 2262658 1" x 3/16" Large Shear Pins
2 x 2091701 Washers
(Warm Tips: A crescent or socket wrench are required in order to install or tighten the nuts properly.)

Compatibility
The trolling motor prop nut Compatible with Minn Kota Props: MKP 38 & MKP 33 Weedless Wedge 2 prop(part number 233160/1865018).

Replacement for minn kota trolling motor prop replacement guides:
1. Disconnect the motor from the battery before changing the propeller;
2. Hold the propeller and loosen prop nut with pliers or wrench;
3. Remove prop nut and washer. If drive pin is sheared/broken, you will need to hold the shaft steady with a screwdriver blade pressed into the slot on the end of the shaft;
4. Turn the old prop to horizontal for preventing the drive pin from falling out, and pull it straight off. If drive pin falls out, push it back into the armature shaft;
5. Align new propeller with the drive pin;
6. Install prop washer and prop nut;
7. Tighten prop nut 1/4 turn past snug;
(Be careful: Over tightening prop nut can damage prop and bend the drive pin.)


ProductSiteLaunchDate : 2015-07-05T15:45:13.577Z
RequiredProductComplianceCertificate : California Air Review Board (CARB)
Size : Small
StreetDate : 2020-06-15T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26100000
WarrantyDescription : Warranty