Cart 2 india

Specification
Brand : Whip-It!
BulletPoint1 : Lightweight and portable
BulletPoint2 : One-touch piezoelectric ignition with adjustable jet flame
BulletPoint3 : Attaches directly to butane fuel canisters (not included)
BulletPoint4 : Maximum flame temperature 1371ºC / 2500ºF
BulletPoint5 : Available in 3 colors: black, white or gray
Color : Grey
ExternallyAssignedProductIdentifier : 7422800394364
ExternallyAssignedProductIdentifier1 : 858424002748
ExternallyAssignedProductIdentifier2 : 0858424002748
Hazmat1 : auto-grounding
Hazmat10 : EG_NoAir
Hazmat11 : ES_NoAir
Hazmat12 : FR_NoAir
Hazmat13 : GB_NoAir
Hazmat14 : IN_NoAir
Hazmat15 : IT_NoAir
Hazmat16 : JP_NoAir
Hazmat17 : MX_NoAir
Hazmat18 : NL_NoAir
Hazmat19 : PL_NoAir
Hazmat2 : 3
Hazmat20 : SA_NoAir
Hazmat21 : SE_NoAir
Hazmat22 : SG_NoAir
Hazmat23 : TR_NoAir
Hazmat24 : US_NoAir
Hazmat25 : ZA_NoAir
Hazmat3 : AE_NoAir
Hazmat4 : AU_NoAir
Hazmat5 : BE_NoAir
Hazmat6 : BR_NoAir
Hazmat7 : CA_NoAir
Hazmat8 : CN_NoAir
Hazmat9 : DE_NoAir
IncludedComponents : Torch
ItemName : Whip-It! Blow Torch Gray
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 12 inches
ItemPackageDimensions_Width : 9 inches
ItemPackageQuantity : 1
ItemTypeKeyword : propane-torches
Manufacturer : Whip-It!
Material : Plastic
MaximumTemperature : 2500 degrees_fahrenheit
ModelName : Blow Torch
ModelNumber : TC-Blwt-17
PackageLevel : unit
PartNumber : TC-Blwt-17
ProductDescription :

Use method :
1. With oxygen acetylene flame on the workpiece is heated to 300--400 degrees celsius.
2.The nozzle and the workpiece surface distance 120~150 mm, at same time you can put the self fluxing alloy powder evenly sprayed on the surface of the workpiece, and then through the flame to melt, to appear on the surface mirror, gradually Moving molten position, so that the alloy powder and the workpieces polarized, dispersed to each other to form a binding layer
3.Different kinds of alloy powder used, can get the abrasion resistance, corrosion resistance and other different properties of strengthening layer.

Note:
1. Medium pressure type structure, it must be used in the medium pressure acetylene generator and an acetylene cylinder pipe, absolutely should not be used in low pressure acetylene generator and pipeline.
2. Spray gun, if no ignition, can not press powder valve switch, to avoid blockage.
3. Attention --must use dry powder.
4. Regular cleaning spray gun, in order to avoid the gas tube holes are blocked. while cleaning pipe hole ,ejects out and clean up the control powder feeder.
5. Keep the gas pipeline drying, smooth to avoid damp effect of powder.
6. All the pipelines of spray welding torch are not contaminated oil, to prevent oxygen meet oil to have combustion and explosion .
7. The use of spray welding torch, oxygen, acetylene pipeline must be equipped with a backfire preventing device.

Package:
3 x Welding nozzle
1 x The connecting nuts
1 x Powder bucket seat
1 x Powder hopper
1 x Control powder feeder
1 x Powder pressing hand
1 x Oxygen joint
1 x The acetylene joint
1 x The handle
1 x Acetylene handwheel
1 x In the middle of the subject
1 x Oxygen handwheel
1 x Hybrid junction
1 x Mixed gas pipe
ProductSiteLaunchDate : 2021-02-04T18:26:12.052Z
Size : QH-1/h
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : unknown
SupplierDeclaredDgHzRegulation2 : unknown
SupplierDeclaredDgHzRegulation3 : unknown
SupplierDeclaredDgHzRegulation4 : unknown
SupplierDeclaredDgHzRegulation5 : unknown
UnitCount : 1