Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Frequency Response Tailored for Music or Speech
BulletPoint2 : Sealed, Rugged Extruded Aluminum Housing
BulletPoint3 : Twin-Cone Speaker for Excellent Dispersion
BulletPoint4 : Aluminum "U" brackets and aluminum grilles
BulletPoint5 : Stainless Steel Hardware
Color : Gray
ConnectivityTechnology : Wired
ExternallyAssignedProductIdentifier : 7500295094966
ExternallyAssignedProductIdentifier1 : 0762110628344
ExternallyAssignedProductIdentifier2 : 762110628344
IncludedComponents : No
IncludedComponents1 : 1*Low-Lying Fog Machine
IncludedComponents2 : 2*Knobs
IncludedComponents3 : 1*Remote Control
IncludedComponents4 : 1*Power Cord
IncludedComponents5 : 1*Oil Container
ItemName : CELL20T Directional Sound Projector, Baked-on White Epoxy Paint, 20 Watts Power Handling, Frequency Response 160-18000 Hz, Frequency Response Tailored for Music or Speech
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : projection-lighting-effects
Manufacturer : Bogen
Material : Polyester
Material1 : Stainless Steel
Material2 : Iron
Material3 : Aluminum
ModelName : Directional Sound Projector
ModelNumber : CELL20T
MountingType : Wall Mount
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : ON-OFF
PartNumber : CELL20T
PowerSourceType : Corded Electric
ProductDescription : Bogen CELL20T Directional Sound Projector, Baked-on White Epoxy Paint, 20 Watts Power Handling, Frequency Response 160-18000 Hz, Frequency Response Tailored for Music or Speech

The Audio attractive, but rugged sound/music projectors for use in constant-voltage systems requiring quality audio. Each has a 5-1/4" full-range twin-cone speaker. Units are rear sealed via a silicone rubber-like gaskets and gland nuts. The CELL20T uses a polypropylene cone for use in outdoor environments, offer long-term reliability and even coverage. They are finished in white with matching aluminum "U" brackets and aluminum grilles. Housings can be painted using epoxy paint.

KEY FEATURES
- Frequency Response Tailored for Music or Speech
- Sealed, Rugged Extruded Aluminum Housing
- Twin-Cone Speaker for Excellent Dispersion
- Aluminum "U" brackets and aluminum grilles
- Stainless Steel Hardware

SPECIFICATIONS
- Cone Speakers & Size: 5-1/4" (134 mm)
- Frequency Response: 160-18,000 Hz +/- 5 dB
- -3dB Down Point: 165 Hz
- Power Handling: 20 Watts
- SPL @ 1W 1M: 92 dB
- SPL @ Full Power, 1M: 105 dB
- Dispersion @ 2 Khz (6 Db Down): 110 degrees
- Directivity Q Factor @2 Khz: 5.5
- Cone Design: Twin Cone
- Cone Material: Polypropylene
- Magnet Weight: 10 oz
- Transformer Max Insertion Loss: 0.6 dB
- Transformer Tap Change: Via Color Coded Wire
- 70.7-Volt Transformer Taps: Red 20, Blue 10, Orange 5, Yellow 2.5, Black Common
- 70.7-Volt Transformer Impedance: Red 250, Blue 500, Orange 1 K, Yellow 2 K
- Housing Material: Extruded Aluminum
- Finish: Baked-on White Epoxy Paint
- Mounting: Non-reflective White "U" Bracket
- Supplied Mounting Accessories: Stainless Steel Bracket Bolts
- Dimensions, Inch (Mm) w/o Bracket: 5.91 x 8.27 (w/gland nut) (150 x 210)
- Net Weight: 5.29 lbs (2.40 kg)


ProductSiteLaunchDate : 2025-05-22T13:40:04.533Z
ScreenSurfaceDescription : Glossy
Size : One Size
SpeakerAmplificationType : Passive
SpeakersMaximumOutputPower : 20 watts
SpeakerType : Sound Projector
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 52161512
ViewingAngle : 45 degrees
WarrantyDescription : No