Cart 2 india

Specification
AgeRangeDescription : adult
Brand : DWFSKZKV
Color : Chinese Copy
CompatibleDevices : Television
ExternallyAssignedProductIdentifier : 9435679276301
ItemName : DWFSKZKV Generator Parts Speed Controller 2301A Speed Governor Control Panel 9907-014
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : process-controllers
Manufacturer : DWFSKZKV
Material : Copper
ModelName : DWFSKZKV
ModelNumber : DWFSKZKV
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : DWFSKZKV
ProductDescription : Speed Controller 2301A For Diesel Generator Genset Replacement
DESCRIPTION:
The 2301A Load Sharing and Speed Controls are designed for use in electric generator systems where multi-unit load sharing is desired. 2301A controls may be used with diesel, gas or gasoline engines, or steam or gas turbines.
Automatic, adjustable start fuel limiting regulates the maximum fuel setting while the engine is starting. This helps decrease pollution and engine wear. Each 2301A control has a self-contained load sensor. Most models provide a 0-200 mA output signal, designed to control EG, EGB, PB, TM, and 2301 actuators. 0-20 mA output is available for special applications. The output signal is proportional to the fuel setting needed to attain the desired speed/load. Position feedback from the actuator is not required. The 2301A controls are compatible with SPM-A Synchronizers, Automatic Generator Loading Controls, Process Import/Export Controls, and Automatic Power Transfer and Load Controls.
Power Supply Rating
90-150 Vdc or 85-132 Vac for High Voltage models
20-40 Vdc for Low Voltage models
Power Consumption
less than or equal to 15 W nominal
Inputs-
3-phase PT Inputs
90-240 Vac line-to-line, 45-66 Hz. PT input, burden is between 1.5 VA and 1.7 VA per
phase at 240 Vac, and between 0.4 VA and 0.5 VA per phase at 120 Vac
3-phase CT Inputs
3-7 Arms at full load, CT input burden at full load is 0.1 VA per phase
Speed Sensor Input Impedance
100-300
Speed Sensor
magnetic pickup 1.0 Vac minimum to 30 Vac maximum
Speed Trim
0-100 for 0 to 10% speed change
Speed Setting
terminals 23-24 jumpered, internally adjustable 100 potentiometer allows external 0-
10% speed trim
Idle Speed Select
external switch, open terminals 19 to 16
Droop
external switch, open terminals 14 to 16
Synchronizer
±5 Vdc for speed change with SPM-A synchronizer
Load Sharing
0-6 Vdc
Outputs-
ProductSiteLaunchDate : 2024-05-04T02:39:52.459Z
Size : One Size
UnitCount : 1
UnspscCode : 26111500