Cart 2 india
In2Cart
Rs. 0
0
Home / Automotive / Primers
Product Information
Editorial Review
This sale is for a quart of fast dry gray 2.1 lbs/gallon voc epoxy primer (SMR-260G-Q) and an 8oz can of epoxy catalyst (SMR-261-8). Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray Quart Kit, SMR-260G-Q/261-8 Epoxy primer & sealer with great color & gloss holdout. SURFACE PREPARATIONS Clean surface with a Wax and Grease Remover. Sand metals or old paint with 180 grit and re-clean. SPRAY GUN SETUP HVLP Gun: Fluid Tip 1.3-1.6 mm, Spray Pressure 8-10 psi APPLICATION Epoxy Primer should be applied in medium wet coats, with a 10-minute flash period between each (at 70 °F). One to two coats is enough to achieve the desired dry film thickness. Epoxy primer may be topcoated after approximately 30 minutes per coat, or up to about 3 days. After three days, the primer MUST be sanded prior to topcoat application. SAFETY This product was designed for and is intended solely for use by trained professionals. Read all warning statements and heed all recommended safety precautions before proceeding. DO NOT USE THIS SYSTEM WITHOUT SUFFICIENT VENTILATION. Users must wear appropriate, properly fitted NIOSH-approved activated charcoal cartridge respirator if a forced fresh-air system is not available. Always wear eye and face protection, as well as gloves and protective clothing. Do not use this product, or be exposed to spray mist / vapors if you have respiratory problems. KEEP OUT OF REACH OF CHILDREN AND PETS. This system comprises multiple components. Once mixed, this system will have hazards of all components. Read warnings on all packages before opening.
Features
1) Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray
2) Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR_0075)
3) Excellent adhesion and corrosion resistance
4) Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes
5) Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075)
Specification
Brand : Speedokote
EAN : 0682821550096
Label : Speedokote
Manufacturer : Speedokote
ProductGroup : Automotive Parts and Accessories
ProductTypeName : AUTO_ACCESSORY
Publisher : Speedokote
Studio : Speedokote
Title : Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray Quart Kit, SMR-260G-Q/261-8
This sale is for a quart of fast dry gray 2.1 lbs/gallon voc epoxy primer (SMR-260G-Q) and an 8oz can of epoxy catalyst (SMR-261-8). Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray Quart Kit, SMR-260G-Q/261-8 Epoxy primer & sealer with great color & gloss holdout. SURFACE PREPARATIONS Clean surface with a Wax and Grease Remover. Sand metals or old paint with 180 grit and re-clean. SPRAY GUN SETUP HVLP Gun: Fluid Tip 1.3-1.6 mm, Spray Pressure 8-10 psi APPLICATION Epoxy Primer should be applied in medium wet coats, with a 10-minute flash period between each (at 70 °F). One to two coats is enough to achieve the desired dry film thickness. Epoxy primer may be topcoated after approximately 30 minutes per coat, or up to about 3 days. After three days, the primer MUST be sanded prior to topcoat application. SAFETY This product was designed for and is intended solely for use by trained professionals. Read all warning statements and heed all recommended safety precautions before proceeding. DO NOT USE THIS SYSTEM WITHOUT SUFFICIENT VENTILATION. Users must wear appropriate, properly fitted NIOSH-approved activated charcoal cartridge respirator if a forced fresh-air system is not available. Always wear eye and face protection, as well as gloves and protective clothing. Do not use this product, or be exposed to spray mist / vapors if you have respiratory problems. KEEP OUT OF REACH OF CHILDREN AND PETS. This system comprises multiple components. Once mixed, this system will have hazards of all components. Read warnings on all packages before opening.
Features
1) Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray
2) Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR_0075)
3) Excellent adhesion and corrosion resistance
4) Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes
5) Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075)
Specification
Brand : Speedokote
EAN : 0682821550096
Label : Speedokote
Manufacturer : Speedokote
ProductGroup : Automotive Parts and Accessories
ProductTypeName : AUTO_ACCESSORY
Publisher : Speedokote
Studio : Speedokote
Title : Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray Quart Kit, SMR-260G-Q/261-8
