Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : Nawwgy
BulletPoint1 : -Manual hydraulic water pressure test pipeline tester.
BulletPoint2 : -Suitable for water, or hydraulic oil as a , for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy, to provide the required pressure; for chemical, construction, plumbing, oil, coal, Shipbuilding and other industries.
BulletPoint3 : -Normal tap water pressure of 0.3MPa, high-rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa. (Tap water 0.1MPa 1KG pressure)
BulletPoint4 : -Fine workmanship and good .
BulletPoint5 : -Easy to use, in use.
Color : Yellow
CompatibleWithVehicleType : ATV
ExteriorFinish : Aluminum
ExternallyAssignedProductIdentifier : 7621140298831
ExternallyAssignedProductIdentifier1 : 0619704043581
ExternallyAssignedProductIdentifier2 : 619704043581
FitType : Universal
IncludedComponents : 1
IsAssemblyRequired : 1
ItemName : Nawwgy Water Pressure Tester 2.5MPa Pipeline Tester 25KG Manual Hydraulic Tester Manual Push Testing Hand Tool Pressure Pump
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-vacuum-testers
LegalComplianceCertifications : 1
Manufacturer : Nawwgy
Material : ABS plastic+metal
ModelName : Tool Test Flange
ModelNumber : hsu4669
NumberOfItems : 1
PartNumber : 1AA200849_Nawwgy
ProductDescription : Feature:
Manual hydraulic water pressure test pipeline tester.
Suitable for water, or hydraulic oil as a , for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy, to provide the required pressure; for chemical, construction, plumbing, oil, coal, Shipbuilding and other industries.
Normal tap water pressure of 0.3MPa, high-rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa. (Tap water 0.1MPa 1KG pressure)
Fine workmanship and good .
Easy to use, in use.
Specification:
Plastic+metal
Color: Yellow
Pipe Color: Random delivery
Size: approx. 290x180x100mm
Pressure: 2.5MPa
: 13ml / time
Pressure Testing Steps:
1. The hot and cold water pipes together with the hot and cold water to form a , into a tube, and test the to any outlet can be the pressure is 0 pressure. When all the water pipes are fully welded before they can test pressure, in the pressure before the closure of all the plug, close the water inlet for .
2. When measuring pressure, shake the until the pressure gauge to 0.9-1.0 or so, that is the current pressure is 3 times the normal water pressure
3. Keep this pressure for a certain amount of for time. Different water pressure measurement for time is not the same, , aluminum , steel and other welded pipe is 30 minutes.
4. Water pipe compression test results to determine:
In the test pressure to check the joints by , the inner wire joints, plugs can not have water seepage, and some people say that plug water seepa , it is a lie, plug the water directly affect the test pressure needle.
In addition, remember: each plug and faucet and other interfaces can not have water leakage phenomenon.
Package included:1 set Test
ProductSiteLaunchDate : 2025-01-08T10:23:37.061Z
RequiredProductComplianceCertificate : California Air Review Board (CARB)
Size : 29*18*10cm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 43222600
WarrantyDescription : 365 days