Cart 2 india

Specification
Brand : Fujifilm
BulletPoint : Reland Sung
BulletPoint1 : Characterize surface pressure between any two mating, touching, or impacting surfaces. Roll length and width are 1 ft x 12.6 in (2 m x 310 mm)
BulletPoint2 : Prescale provides a surface pressure “map” that illuminates actual pressure magnitude (in precise PSI or kg/cm^2) and distribution between your two surfaces. The pressure range for this film is 0.87 - 7.3 PSI (0.06 - 0.51 kg/cm²)
BulletPoint3 : Prescale reveals the contact surface pressure by virtue of a color change. This color change is instantaneous (less than a millisecond) and permanent
BulletPoint4 : Prescale comes on a roll, is super thin, and can easily be cut from the supplied roll with scissor or laser to your precise application requirement
BulletPoint5 : The color intensity of the film is directly related to the amount of pressure applied to it
BulletPoint6 : All films guaranteed to have 18 months of shelf life available.
Color : One Color
CompatibleDevices : Camera
ExposuresPerRoll : 8
ExternallyAssignedProductIdentifier : 9778511776370
ExternallyAssignedProductIdentifier1 : 0198168809167
ExternallyAssignedProductIdentifier2 : 198168809167
FilmColorType : Color
FilmFormatType : Sheet
IncludedComponents : Pressure Indicating Film
ItemName : Fujifilm Prescale Ultra Extreme Low LLLLLW (5LW) – Surface Pressure Mapping; Pressure Indicating Film; Tactile Sensor - Pressure Range 0.87-7.3 PSI; 1ft x 12.6 in. Section
ItemPackageDimensions_Height : 55.88 centimeters
ItemPackageDimensions_Length : 12.7 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-pressure-sensors
LowerTemperatureRating : -20 degrees_celsius
Manufacturer : Fujifilm
Material : Paper
MaximumSupplyVoltage : 12 volts
MeasurementAccuracy : .001
MeasuringRange : 5kg - 5000kg
ModelNumber : 265218151
MountingType : Surface Mount
NumberOfBoxes : 1
NumberOfItems : 1
OutputType : Push-Pull
PartNumber : 5LW1ft
ProductDescription : Prescale is a unique pressure indicating sensor film that illuminates what is occurring between any two mating, contacting, or impacting surfaces.

Simply place the paper-thin pressure indicating film between your two surfaces, whether in your product, process, or R&D environment and the film instantaneously and permanently changes color to capture a “snapshot” in time of the maximum compressive load that has occurred between the two surfaces and the magnitude of that pressure (in PSI or Kg/cm^2).

The pressure film immediately develops to a shade of magenta whose intensity is tightly correlated to a precise level of pressure (in PSI or Kg/cm^2).

Conceptually similar to Litmus paper, the color intensity (ie pressure magnitude) that the film captured when under compressive load can readily be translated into a precise pressure level (in PSI or kg/cm^2) by visually comparing the pressure film to a color correlation chart that is included with the purchase).

Additionally finer interpretation may be resolved by using an optical scanner product that digitally analyzes the pressure indicating film.

Common applications include heat seal planarity, roller set parallelism (nip impressions), object impact, lamination press, heat sink pressure, bolted interface pressure and clamping forces.

Prescale permanently retains the color image it captures after being subjected to pressure which is valuable for archiving purposes, especially for ISO and FDA audits. There are 8 distinct film types offered. Ranging from about 2 PSI (0.14 kg/cm^2) up to 43,200 PSI (3,000 kg/cm^2).
ProductSiteLaunchDate : 2024-04-10T14:52:49.273Z
RollQuantity : 1
Size : 5KG
SpecificUsesForProduct : weighing, electrical
Style : S Type
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 24141500
UpperTemperatureRating : 70 degrees_celsius