SpecificationBrand : MAXITROL
BulletPoint1 : Bundle includes 2 Items: (1) TeeJet 6815-1/2-HSS-700 Pressure Regulator with (1) Repair Kit
BulletPoint2 : Pipe Connections: 1/2" male NPT inlet, 1/2" female NPT outlet
BulletPoint3 : Pressure Range: 700 PSI
BulletPoint4 : Brass material, hardened stainless steel seats
BulletPoint5 : Wide Application Range: Can be used in water treatment , steam , air compression , natural gas pipelines, and other fields.
Color : Red
Department : Unisex Adult
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 7639655004847
ExternallyAssignedProductIdentifier1 : 3121224162255
ExternallyAssignedProductIdentifier2 : 7435301330335
IncludedComponents : Product
ItemDisplayWeight : 5.35 pounds
ItemName : Maxitrol R600S 1" Gas Appliance Regulator 1,400,000 BTU
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : pressure-regulators
Manufacturer : Maxitrol
Material : Brass
ModelName : HPRR 948-814
ModelNumber : 6815
NumberOfItems : 1
PartNumber : R600-1
ProductDescription :
The R & RS series is intended for use with both mainburner and pilot load applications. The double diaphragmbalanced valve design makes it possible to build a regulator physically small in size yet having good capacity characteristics. They are able to maintain steady outlet pressure control with widely varying inlet pressures. The high quality molded balancing diaphragm eliminates the inlet pressure effect acting on the valve.The housings are rugged aluminum die castings. Allinternal components are carefully selected and corrosionresistant. The diaphragms are of high quality supportedsynthetic rubber components having excellent lowtemperature performance. The RS models incorporate aresilient chemically bonded synthetic rubber ring on thevalve member. The soft seating insures satisfactory pilotcontrol at inlet pressures up to 5 psi.
Product Specifications
- Pipe Sizes: 3/8 to 1 threaded connections with NPT or ISO7-1 threads.
- Housing Material: R400(S), R500(S), R600(S): aluminum.
- Mounting: Suitable for multi-positional mounting. If ball check vent limiting device is installed, mount in an upright position only. NOTE: All Maxitrol gas pressure regulators should be installed and operated in accordance with Maxitrol Safety Warning Instructions.
- Certifications: R400(S), R500(S), R600(S): ANSI Z21.18/CSA 6.3 Gas Appliance Pressure Regulators.
- Gas Types: Suitable for natural, manufactured, mixed gases, liquefied petroleum gases, and LP gas-air mixtures.
- Maximum Inlet Pressure: CSA Certified: R400(S), R500(S), R600(S): 1/2 psi (3.4 kPa) Maxitrol Tested: R400, R500, R600: 1 psi (6.9 kPa); R400S, R500S, R600S: 5 psi (34.5 kPa)
- Emergency Exposure Limits: R400, R500, R600: 2 psi (13.8 kPa) R400S, R500S, R600S: 12.5 psi (86.2)
- Ambient Temperature Ranges: R400(S), R500(S), R600(S): -40 to 205F (-40 to 96C) Suitable for pilot flow applications. (Circle P) (0.15 CFH NG), None (1.5 CFH NG).
Note: This product should be ins
ProductSiteLaunchDate : 2021-04-20T10:15:23.817Z
Size : DN20
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
ValveType : Pressure Relief Valve