Cart 2 india

Specification
Brand : TISEKER
BulletPoint1 : TISEKER High Quality Adjustable Guide Presser Foot.
BulletPoint2 : Perfect for channel quilting. The Foot guides your topstitching and decorative stitching perfectly.
BulletPoint3 : The presser foot has a “ruler” with a guide designed so you can place the guide anywhere you want.
BulletPoint4 : Place the guide along an already stitched seam or against any edge to give you beautiful topstitching. Use both straight and decorative stitches.
BulletPoint5 : Fits for All Low Shank Snap-On Singer* (Some Singers Require Low Shank Adaptor),Brother, Babylock, Euro-Pro, Elna, Janome, Kenmore, White, Juki, New Home, Necchi, Viking, Simplicity and More Sewing Machines.
Color : White
ExternallyAssignedProductIdentifier : 4582494932785
ExternallyAssignedProductIdentifier1 : 610683764382
ExternallyAssignedProductIdentifier2 : 0610683764382
GpsrSafetyAttestation : 1
IsElectric : 1
ItemName : TISEKER Adjustable Guide Sewing Machine Presser Foot for All Low Shank Snap-On Brother, Babylock, Singer, Janome, Juki, New Home and More Domestic Sewing Machines
ItemPackageDimensions_Height : 8.89 centimeters
ItemPackageDimensions_Length : 0.508 centimeters
ItemPackageDimensions_Width : 5.08 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sewing-machine-pressure-feet
Manufacturer : TISEKER
Material : Metal
ModelName : FOOT17
ModelNumber : FOOT17
NumberOfItems : 1
PartNumber : FOOT17
PowerSourceType : Corded Electric
ProductDescription : *** Please note ***

This "Large Foot Controller" cannot be used with the "Remote Thread Cutter" if your machine does not have two pin jacks. There are two types of "large foot controllers": one with a pin jack on the left side and one without a pin jack. This controller is the type without a pin jack, so the "remote thread cutter" cannot be used with it.
If you wish to use this controller with the "Remote Yarn Cutter," please purchase the "Large Foot Controller" with a pin jack. Please note this point.


However, if your sewing machine is equipped with two pin jacks, you can use it with the "Remote Thread Cutter". In that case you can use this "Large Foot Controller" with the "Remote Thread Cutter". If your sewing machine has only one pin jack, you can use the "Large Foot Controller" with your machine, but not the "Remote Thread Cutter". Please be careful.



This foot controller fits in with a sewing machine of a computer.

-The main model with which I fit in is the following.-
Memory Craft : 12000, 11000(SE), 8900QCP, 9900,
77007700QCP, 8100, 6600, 6500, 4000, etc.
DC4030, DC2007, DC1018, DC1050, DC5100, DC2014,
DC2013, DC2012, DC2011, 7330, 3160QCP Skyliine-S5, ..etc

(*However, as mentioned above, if you want to use it with the "Remote Thread Cutter", your sewing machine must have two pin jacks.)


When it's unclear, please question anytime!

ProductSiteLaunchDate : 2022-04-15T08:38:37.783Z
Size : 1/16"
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 53131600