Cart 2 india

Specification
AgeRangeDescription : adult
Brand : SWAG Offroad
BulletPoint1 : Press brake kit comes unassembled, you do the final assembly and weldin
BulletPoint2 : Constructed out of high strength 3/8" steel
BulletPoint3 : This universal press brake kit will bend steel up to 37.5" wide material.
BulletPoint4 : Designed to fit in hydraulic presses that are at least 40" wide between the vertical beams.
BulletPoint5 : ✎ High Speed Steel
BulletPoint6 : Dimension:206.2 108 163.6 mm
BulletPoint7 : Packing Include:1X Vacuum Pressure Switch;1X Vacuum Hose;1X Mounting Hardware Kit
BulletPoint8 : Type:Vacuum Pump
BulletPoint9 : Color:As Shows in the Pictures
Color : Raw Steel
ExternallyAssignedProductIdentifier : 7637800005534
IncludedComponents : Adjustable Back Stop
ItemDisplayDimensions_Depth : 4 inches
ItemDisplayDimensions_Diameter : 1 inches
ItemDisplayDimensions_Height : 10 inches
ItemDisplayDimensions_Length : 40 inches
ItemDisplayDimensions_Width : 4 inches
ItemName : SWAG Off Road 40" Press Brake DIY Builder Kit Builder Kit With Adjustable Back Stop
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-press-brakes
Manufacturer : SWAG Offroad
Material : Metal
ModelName : 32831470855
ModelNumber : 32831470855
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 6PB40"UA
PowerSourceType : Manual
ProductDescription : 40 Inch Universal Press Brake DIY Builder Kit.

Press brake kit comes unassembled, you do the final assembly and welding. Constructed out of high strength 3/8" steel with a 1.0" x 4.0" thick top die and 3.0" wide bottom die. This universal press brake kit will bend steel up to 37.5" wide and is designed to fit in hydraulic presses that are at least 40" wide between the vertical beams, however it kit can easily be cut down or modified to accommodate smaller presses.

Note, due to the custom nature of this kit it does not come with an adjustable back or side stop. Note, the max bending width and thicknesses are determined upon your hydraulic press and thus actual numbers are dependent upon your press.

Tools required for assembly, welder, grinder, level, small square.
ProductSiteLaunchDate : 2014-06-26T07:00:00.000Z
Size : 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27110000
WarrantyDescription : 12 Months