Cart 2 india

Specification
Amperage : 20 amps
Brand : KAKA INDUSTRIAL
BulletPoint1 : EB-4816 can bend boxes or pans to almost any depth since it doesn’t rely on conventional finger depths.
BulletPoint2 : 48-Inch Magnetic clamping Pan and Box Bending Brake,16-Gauge Mild Steel Capacity
BulletPoint3 : 6-ton magnetic power is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
BulletPoint4 : To achieve proper performance and prevent damage to the machine, the power supplied must be 220VAC . Failure to comply will damage the machine and void the warranty.
BulletPoint5 : The breakthrough open-ended design allows you to create enclosed ducts and shapes impossible to make with a traditional box and pan brake.
BulletPoint6 : This product is a medium-to-large machine (weighing more than 100lbs), and the lift gate service is a service to help unload the goods, not a freight charge. In order to ensure that the goods are delivered smoothly, I am asking here on behalf of the carrier. It is not a mandatory purchase, please purchase it as needed. If you have an unloading method, please ignore the above information. I hope you can understand.
Color : Blue and White
ExternallyAssignedProductIdentifier1 : 720707933851
ExternallyAssignedProductIdentifier2 : 0720707933851
ItemDisplayWeight : 500 pounds
ItemName : KAKA INDUSTRIAL EB-4816M 48-Inch Magnetic Sheet Metal Press Brake, 16-Gauge Mild Steel Capacity, 6-ton magnetic power, bend boxes or pans to any depth 220V-60HZ-1PH…
ItemPackageDimensions_Height : 57 inches
ItemPackageDimensions_Length : 44 inches
ItemPackageDimensions_Width : 15 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-press-brakes
Manufacturer : KAKA INDUSTRIAL LLC
Material : Metal
MaximumPower : 2500 watts
ModelName : EB-4816M
ModelNumber : 173408V220
PartNumber : 173408V220
PowerSourceType : ac
ProductDescription :

KAKA INDUSTRIAL EB-4816 Manual Magnetic Sheet Metal Brake, Box and Pan Brake

 EB-4816 can bend boxes or pans to almost any depth since it doesn’t rely on conventional finger depths.

48-Inch Magnetic clamping Pan and Box Bending Brake,16-Gauge Mild Steel Capacity

 6-ton magnetic power is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.

To achieve proper performance and prevent damage to the machine, the power supplied must be 220VAC . Failure to comply will damage the machine and void the warranty.

The breakthrough open-ended design allows you to create enclosed ducts and shapes impossible to make with a traditional box and pan brake.

Scaled stroke angle control lets you deliver repeatable bends time after time.

You can set up the mild steel clamping bar with straight bars (of various widths if you had very tight boxes to make) for straight bends or segmented clamping bars for box and pan applications.

Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.

You can remove the bottom leaf's bending extension for the tightest bend dimension between bends of .625”.

Comes with product supports and adjustable back gauges for production runs.

KAKA INDUSTRIAL covers this box brake with a 2-year parts warrantyEasy, hands-free operation:

    Put a piece of material between the clamping bar to the depth required.

    Engage the powerful magnet in the bending bed with push button control.

    Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material.

    Lift the the bottom bending leaf to complete the bend.

Recommended for:

HVAC shops, industrial art shops, and general sheet metal fabrication shops.

ProductSiteLaunchDate : 2023-07-04T14:12:40.228Z
Size : 48 inches Type M
Style : Magnetic Sheet Metal Brake
UnitCount : 1
UnspscCode : 27110000
Voltage : 220 volts
Wattage : 2200 watts