Cart 2 india

Specification
AutoPartPosition : inside
Brand : GZYF
BulletPoint1 : Fitmet: for Suzuki GSX650F GS500F for HONDA Shadow 1999-2005. (More detailed fitment is in the product description. Please check your vehicle model is the same as listed .)
BulletPoint2 : Multi-function Tail light, braking light, running light, comes with amber built-in turn signals,
BulletPoint3 : Super soft bright, always provide clear vision For you and the people around you.
BulletPoint4 : Wiring Diagram compatible for most bikes: Black Wire(Negative), Green Wire(Brake), Red Wire(Running Light)
BulletPoint5 : Good quality and durable, a good replacement for your stock one.
Color : smoke
CompatibleWithVehicleType : Motorcycle
ItemName : GZYF Motor Integrated Brake Tail Running Light License Plate Lamp for Suzuki GSX650F 2008-2009 for HONDA SHADOW VLX SPIRIT 1100 1999-2005
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 18 centimeters
ItemPackageDimensions_Width : 17 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : powersports-tail-light-assemblies
Manufacturer : GZYF
PartNumber : 47YF172
ProductDescription : Fitment:
for Suzuki GS500F 2003-2005
for HONDA SHADOW VLX 1999-2005
for HONDA SHADOW SPIRIT 1100 1999-2005
for HONDA CBR 1100XX 1997-1998
(Please make sure that it will For your motorbike .)

Specification:


Features:
Specifications:
Condition:Brand New &
Lens Color:Smoke
LED Color:Red(80pcs),Amber(72pcs)
Installation:
1.Connect the two YELLOW wires to the positive turn signal wires by provided red connectors or your existing factory connectors.
2.Ground wire is not needed unless you are using resistors to slow down the blinking rate. (The ground wire is the same color wire used on both turn signals.)
3.To remove the error code on dashboard or slow down the blinking rate by provided resistors if necessary:
Wiring Diagram compatible for most bikes:
Black Wire(Negative)
Green Wire(Brake)
Red Wire(Running Light)
1)Connect one end of the resistor to the ground wire on your turn signal harness from your bike.
2)Connect the other end of the resistor to both the YELLOW wire from our taillight and the positive turn signal wire from your turn signal harness from your bike.
3)Repeat the same process for the other side.
4.To use the red connectors, place one wire inside along one channel, place another wire inside along the other channel.
Push down the metal pin as it will make a small cut on each wire bridging the connectors;
if you are using the resistors, place one end of the resistor in the middle of either channel with the one wire.
Pakckage:1pc Taillight
ProductSiteLaunchDate : 2018-06-14T09:13:57.051Z
SpecificUsesForProduct : Tail Light
UnspscCode : 25172900