Cart 2 india

Specification
AudioOutputMode : Stereo, Surround
Brand : PoE Texas
BulletPoint1 : Perfect for Raspberry Pi 4, BeagleBoard, Google Wifi, and more. Easily convert Power Over Ethernet from your existing PoE switch, with an input voltage range of 44v to 56v POE and an output voltage of 5 volts 4 amp for one camera or other device.
BulletPoint10 : Status LED lights (Power, Ethernet Link/ACT, PLC Link)
BulletPoint11 : Easy installation into existing home power outlets to link internet enabled entertainment devices from room to room (No professional installation required)
BulletPoint12 : Transmission rates up to 200 Mbps (phy rate)
BulletPoint13 : Contains one (1-port) Power-line Ethernet Adapter, one (4-port) Power-line Ethernet Switch, and two Cat 5 RJ45 jumpers
BulletPoint2 : Extends 20 watts of power to devices up to 328 feet away. Standard USB-C plug fits any USB-C device and is compatible with your existing IEEE 802.3at PoE switch or injector (sold separately). 10/100/1000 Mbps data rate. *Not compatible with USB Type C Power Delivery for Apple Tablets, SurfaceGo, Samsung Tab, etc.
BulletPoint3 : Quick & easy installation. Simply connect POE to your GAT-USBC-Legacy; the LED light will come on if there’s power. Connect your GAT-USBC-Legacy to charge your device.
BulletPoint4 : Please note: before purchasing, please make sure your device accepts 5 volts USB-C power and NOT Power Delivery (PD). This device separates power and data, so your device will need a data port with an RJ-45 connection.
BulletPoint5 : Backed by a generous 1-year warranty. Expert technical support from Austin, Texas available. Please call 512 479 0317.
BulletPoint6 : Requires an electrical power environment where the electrical wiring is on the same power circuit (100~240V AC grid) and should not be connected through an extension cord, power strip or surge protector. For optimal performance, plug directly into a wall socket and to the same unbroken circuit.
BulletPoint7 : Standards: HomePlug AV, IEEE 802.3, IEEE 802.3u
BulletPoint8 : Transform power outlets into a high-speed Internet connection
BulletPoint9 : Coexists with cable TV and terrestrial broadcasts
Color : PD Power 5 Volt Only (20w)
CompatibleDevices : Tablet
CompatibleDevices1 : Television
CompatibleDevices2 : Personal Computer
ConnectivityTechnology1 : HDMI
ConnectivityTechnology2 : Ethernet
ConnectorGender : Male-to-Female
ConnectorType : USB Type C
ControlMethod : remote
CurrentRating : 5 amps
CustomerPackageType : Standard Packaging
DataLinkProtocol : IEEE 802.3
DataLinkProtocol1 : Gigabit Ethernet
DataLinkProtocol2 : Ethernet
DataTransferRate : 1000 megabits_per_second
ExternallyAssignedProductIdentifier : 7687021946468
ExternallyAssignedProductIdentifier1 : 722512405905
ExternallyAssignedProductIdentifier2 : 0722512405905
ExternallyAssignedProductIdentifier3 : 00881317514226
ExternallyAssignedProductIdentifier4 : 0760559114206
ExternallyAssignedProductIdentifier5 : 00760559114206
HardwareInterface : ethernet
HardwareInterface1 : usb
HardwareInterface2 : ethernet
IncludedComponents : 1x USB Power Cable
InputVoltage : 5 volts
ItemDisplayDimensions_Length : 8.19 inches
ItemName : PoE Texas PoE+ Power for USB-C Devices, Including Google WiFi & Raspberry Pi – for POS Systems, Digital Signage & More, Extend Power Delivery Up to 328 Feet
ItemPackageDimensions_Height : 14.6 centimeters
ItemPackageDimensions_Length : 8.4 centimeters
ItemPackageDimensions_Width : 8.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : powerline-network-adapters
Manufacturer : PoE Texas
Material : ABS
ModelName : GPLHDPROK
ModelNumber : GAT-USBC-Legacy
NumberOfItems : 1
NumberOfPorts : 2
OutputPower : 16 watts
PartNumber : GAT-USBC-Legacy
Pattern : 1 to 4 Splitter
PowerPlugType : no_plug
ProductDescription : Ideal for use with Google Wifi and other non-PoE Devices: With the GAT-USBC-Legacy, you can use Power over Ethernet to extend distance to your 5 volt device. The GAT-USBC-Legacy splitter will provides 20 watts of continuous 5 volt power to your device. The 2.1mm to USB-C adapter allows you to deliver 5 volts on USB-C for Google Wifi and more! Use with your existing 802.3at PoE+ Switch or 48v PoE Injector to power devices up to 328 feet (1 meter) away.

Easy set up and installation will allow you to instantly convert PoE+ to 5 volts with divided gigabit data. Power will be delivered on the DC output and 10/100/1000 data will be available separately on the RJ45.

PRODUCT SPECIFICATIONS:

• Connector Types: Female DC Barrel / 2x Female RJ45
• Connector Size: 5.5 x 2.1mm DC
• Cable Adapter: 2.1mm to USB-C
• Cable Length: 39 Inches
• Data Rate: 10/100/1000
• Dimensions: 4x2x1 Inches
• Efficiency: 90%
• Input Voltage Range: 44-56 Volts (IEEE 802.3at Compliant)
• LEDs Per Port: Green (POE) / Yellow (5V)
• Max Power: 20 Watts
• Mount Type: Wall or DIN Rail Clips (Sold Separately)
• Operating Temperature: -10 to 60C
• Operating Humidity: 5% to 90%
• Output Voltage: 12 Volts
• POE Method: IEEE 802.3at for 20 Watts / IEEE 802.3af for 13 Watts
• POE Mode/Pinout: Mode A (1,2 3,6) / Mode B (4,5 7,8)
• Weight: 3 oz
• Power Supply: Not Included - See our 48 Volt PoE Injectors and Switches

ProductSiteLaunchDate : 2018-07-03T20:25:45.708Z
Size : 2X20.8CM
SpecificUsesForProduct : Tablet
Style : PD Power 5 Volt Only (20w)
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurroundSoundChannelConfiguration : 2
TotalHdmiPorts : 4
UnitCount : 1
UnspscCode : 43220000
VideoEncoding : H.264, H.265/HEVC
Voltage1 : 56 volts
Voltage2 : 5 volts
Voltage3 : 48 volts
WarrantyDescription : NO
WarrantyType : Limited
Wattage : 20 watts
WirelessCommunicationTechnology1 : IR
WirelessCommunicationTechnology2 : Wi-Fi