Cart 2 india

Specification
Brand : iCreatin
BulletPoint1 : 1 Gigabit Ethernet port input and 1 PoE Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds.
BulletPoint2 : Converts a non-PoE Gigabit port to a PoE Gigabit port, Network a PoE device located up to 100 meters (328 ft.) away via Full Duplex Gigabit speeds
BulletPoint3 : Auto-sensing technology delivers up to 15.4W to a PoE device with compatibility for 802.3af PoE devices.
BulletPoint4 : Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.
BulletPoint5 : High Performance Gigabit PoE Injector Power supply, IEEE 802.3af Compliant.
Color : Gigabit PoE,15.4W
CompatibleDevices : Wireless Access Point, IP Phone, Network Camera, IEEE 802.3af/at Powered Device
CustomerPackageType : Standard Packaging
DataLinkProtocol1 : Gigabit Ethernet
DataLinkProtocol2 : IEEE 802.3
DataLinkProtocol3 : Ethernet
DataTransferRate : 1000 megabits_per_second
ExternallyAssignedProductIdentifier1 : 791348245269
ExternallyAssignedProductIdentifier2 : 0791348245269
HardwareInterface : ethernet
ItemName : Gigabit PoE Injector 48V15.4W Power Adapter, IEEE 802.3af Compliant,10/100/1000Mbps RJ45, Compatible with Ubiquiti U-POE-AF, TP-Link TL-POE150S, TRENnet TPE-113GI,EnGenius EPA2406GR
ItemPackageDimensions_Height : 13.9954 centimeters
ItemPackageDimensions_Length : 4.9022 centimeters
ItemPackageDimensions_Width : 8.001 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : powerline-network-adapters
Manufacturer : iCreatin
ModelNumber : GFtz-0731-33
PartNumber : GFtz-0731-33
ProductDescription : Note: This POE injector works for 10/100/1000Mbps Gigabit network and PoE enabled devices.

The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power.
The iCreatin PoE Injector can easily connect any IEEE 802.3af compliant device to a non-PoE LAN switch port.
This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af/at powered device to a LAN switch.
Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines.
To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device.
Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems.
The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe.

Specifications

2 Gigabit Ethernet ports
Up to 15.4W Rated power, Supplies PoE (15.4W), support both IEEE802.3af
Power feed: Support both Mode A and Mode B;
Data rate: 10\100\1000Mbps.
Deliver power up to about 328 feet(100 meters)
Support 100-240V voltage input

What in Box?

1 x Gigabit PoE injector
1 x US power cord"
ProductSiteLaunchDate : 2020-02-16T08:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43222600
Voltage : 240 volts