Cart 2 india

Specification
Brand : Larson Electronics
BulletPoint1 : This unit steps down 242 volts AC to 220 volts AC without needing a large format transformer
BulletPoint2 : For safety reasons, we cannot accept returns on transformers, phase or frequency converters.
BulletPoint3 : Once these products leave the factory, they cannot be resold and must be destroyed to ensure every unit sold is safe to use.
BulletPoint4 : Compact size: 5in length by 4.75 in wide by 9.25 in tall - Weight: 18 lbs
BulletPoint5 : Contact us today for information about custom options tailored to meet your specific needs
Color : Grey
CurrentRating : 34.4 amps
IncludedComponents : AMP03FJZ
ItemName : 1 Phase Buck and Boost Step-Down Transformer - 242V Primary - 220V Secondary at 34.4 Amps - 50/60Hz
ItemPackageDimensions_Height : 11 inches
ItemPackageDimensions_Length : 21 inches
ItemPackageDimensions_Width : 21 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-power-transformers
Manufacturer : Larson Electronics LLC
Material : Copper
MaximumFrequency : 60 hertz
MinimumFrequency : 60 hertz
ModelNumber : 147784
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 147784
ProductDescription : This single phase step-down Buck and Boost Transformer from Larson Electronics is powerful, reliable, and designed with the environment in mind. This transformer is designed to decrease 242 volts to 220 volts, and is needed when the line-voltage is higher than the required voltage for equipment. Suitable for both indoor and outdoor applications, providing increased reliability, higher efficiency, protection against critical equipment failures and an extra level of protection by isolating the power source from the connected device. Transformer Features: This buck and boost transformer is a single phase unit with a 7.56 KVA rating and a primary voltage of 242V AC using a maximum of 31.2 amps on the primary side. This step-down transformer has a secondary voltage of 220V and provides up to 34.4 amps available on the secondary side. This is designed to decrease voltage from an input voltage of 242 volts to an output voltage of 220 volts. This step-down transformer will allow equipment that draws up to 34.4 at 220 to be powered from 242 power sources. This features a 130 degrees C insulation with a 80 degrees C temperature rise. Construction: The copper winding in This are formed from high quality magnetic copper wire helps to improve performance. Although we carry several models of power distribution transformer systems, we can deliver custom ordered units almost as quickly as our prebuilt units. If this model does not meet your needs, please contact us to discuss your specific requirements.
ProductSiteLaunchDate : 2021-09-22T17:43:54.296Z
SpecificationMet : NEMA
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1