Cart 2 india

Specification
Brand : Senlin
BulletPoint : Current Switches
BulletPoint1 : Continuous current range : 100nA - 6A
BulletPoint2 : Output voltage range : 0.5V - 5V
BulletPoint3 : Sampling speed : 100Ksps
BulletPoint4 : Current resolution : 80nA
BulletPoint5 : Ground noise : ＜80nA
Color : Built-in Ct
ConnectorType : Through Hole
CurrentRating : 8 amps
ExternallyAssignedProductIdentifier : 9195490666414
ExternallyAssignedProductIdentifier1 : 0733805253943
ExternallyAssignedProductIdentifier2 : 733805253943
IncludedComponents : Power analyzer host,USB Communication line,Test leads,DC Power adapter
InputVoltage : 8 volts
ItemName : uA Current Power Consumption Tester,DC Analyzer,Power Monitor,Ampere Meter, BLU939
ItemPackageDimensions_Height : 2.76 inches
ItemPackageDimensions_Length : 9.84 inches
ItemPackageDimensions_Width : 7.87 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-power-meters
Manufacturer : Senlin
Material : Copper
MaximumSwitchingVoltage : 30 volts
MeasurementAccuracy : Reference precision table
MeasurementSystem : Metric
ModelNumber : BLU939
MountingType : Flush Mount
NumberOfBoxes : 1
NumberOfItems : 17
OperatingVoltage : 8 volts
OperationMode : Automatic
PartNumber : BLU939
PowerSourceType : PowerSource
ProductDescription : BLU power analyzer is a small portable power supply, A current measurement unit and a data-acquisition module,Provide a robust power measurement solution for mobile devices. BLU power analyzer can analyze the power consumption of devices,Electrical engineers and software developers can utilize BLU power analyzer to optimize the design and analyze the performance of devices. BLU power analyzer provide 5V voltage regulator output and up to 6A continuous current,100nA level current can be measured,automatic range,sample rate 100Ksps,Capture transient signals easily. Can measure current,can also be used as a constant voltage linear DC regulated power supply.It can replace batteries and other VCCs to provide DC linear regulated power supply to the DUT,At the same time the power consumption during operation of the device is recorded. BLU power analyzer with a easy-to-use desktop application for Windows,Ubuntu & MacOS. High-precision current testing, Dynamic current waveform display analysis. It also exports the data to CSV formats.
ProductDescription1 :

Package inlcuded:

0-5A Current and 0-30V voltage collector（Please select the version you need）

 

Description:

 

Power supply voltage: DC 8-25V(12V recommended);

Operating current: 8-13MA;

MODBUS RTU protocol: 03 read command, 06/16 write command.

Serial port Baud rate: 1200 2400 9600(default) 19200 38400 57600 115200 ,N/E/O,8,1;

By modifying the RS485 address, up to 247 modules can be cascaded (more than 16 please use R485 repeater);

Voltage and current values can be read;

Current measurement range: 0~1A, 0~2A, and 0~5A. It is recommended to select a version with a smaller range within the range that meets the measurement;

Voltage measurement range: 0~30V;

Measurement accuracy: 1%. If the read value is too different from the actual value, recalibrate

Size: 72X 47 X 12MM(only board),87X 50X 37MM(with case)

Weight: 23g(board only),68g(with case)

Note:

This product is used to collect small current signals from time to time. If you need a 4-20MA signal collector, please choose the following products: N4AIA04 N46IB02 N43IC04

Note: The module will restore factory settings and restart automatically after 5 seconds of shorting the RES port.

MODBUS RTU protocol please refer to : '' N4VIA02 Modbus RTU''

ProductDescription2 :

For more information, please contact me

DIN rail Box parameters:

Product model: UM72

Color: Green

Width: suitable for PCB board width UM72(72mm)

Insulation grade: flame-retardant VO grade

Backplane length: suitable for 47 mm PCB boards

Net weight: 45g

Installation: DIN35 and C45 rail

 

 

Application

 

PLC IO expansion board

Smart Home,Home Automation ,Wiser Home;

Current and voltage monitoring of industrial control equipment

Security Monitoring

Identification system;

Current and voltage meters

LED Lamp Drivers

Automatic curtain control

Wiring Diagram:

1 Only measure 0-30V voltage signal

2 Only measure 0.04-1/2/5A current signal (the voltage of current signal can be DC 0-110V)

3 Measure voltage and current signal

ProductSiteLaunchDate : 2024-03-25T07:00:00.000Z
Size : 40-300V
SpecificationMet : ABS
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41113700