Product Information
Specification
Brand : HFBTE
BulletPoint : The power quality analyzer measures currents and voltages and reports real-time RMS values for all 3-phases and neutral. In addition, the power meter calculates power factor, realpower, reactive power, and more.
BulletPoint1 : ❤❤(1)POA-3H Power Quality Analyzer is a comprehensive test instrument,designed for field test of three phases, multi-functional and intelligent, concise man-machine operation. It is easy to use, large LCD screen display, high resolution, interface in both Chinese and English, shock-proof shell structure and so on.
BulletPoint2 : ❤❤(2)Can simultaneously measure the 4-channel current (ABC three phase and neutral wire current), 4-channel voltage (ABC three-phase voltage and neutral line voltage to ground), the peak value of current voltage, maximum/minimum value over a period, three-phase imbalance factor, short-time voltage flicker, transformer K factor, active power, reactive power, apparent power, power factor and displacement power factor, active power, reactive power, apparent power, etc;
BulletPoint3 : ❤❤(3)POA-3H Power quality analyzer adopt DSP + ARM double processor architecture, DSP is use for data collection and the processing of algorithm, the ARM is use for the communication protocol and the man-machine interface processing; Analog signal acquisition is by 2 pieces AD7655 of ADI company.
BulletPoint4 : ❤❤(4)Using a 5.6 -inch LCD color screen display, a resolution of 640 dots x 480 dots, with different display color difference between the parameters of phase, waveform, vector diagram, harmonic ratio, the user can be more efficient and more intuitive understand the state of power grid parameters.
BulletPoint5 : ❤❤(5)Built-in flash memory can store 60 group of screenshots at the same time, 150 groups of capture transient voltage/current waveform figure, and 12800 groups of alarm list. Starting current detection model can continuously capture starting current waveform for 100 s. Built-in 2G memory card to store the trend curve record, simultaneous recording 20 parameters (can choose according to need) collect data for once every five seconds, trend curve records can be stored for 300 days.
Color : Red+Grey
IncludedComponents : Power Quality Analyzer
ItemName : HFBTE Power Quality Analyzer Three Phase Power Quality Analyzer Meter with Large Range 10A to 6000A 4 PCS Ф300mm Flexible Coil Current Sensor USB Interface W VA VAR PF DPF cosφ tanφ
ItemPackageDimensions_Height : 22 centimeters
ItemPackageDimensions_Length : 45 centimeters
ItemPackageDimensions_Width : 30 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-power-meters
LowerTemperatureRating : 10 degrees_celsius
Manufacturer : HFBTE
MaximumOperatingVoltage : 600 volts
MeasurementAccuracy : precise
MinimumOperatingVoltage : 110 volts
ModelName : Mavaolad7pxzy3mc
ModelNumber : 2024110123dara
NumberOfItems : 1
PartNumber : 2024110123dara
PowerSourceType : Battery Powered
ProductDescription : Main Function:
1. POA-3H is a comprehensive test instrument of multifunctional, intelligent, man-machine operation simple. Comprehensive analysis and diagnosis all the voltage, current, power, electrical energy, harmonic, phase and other electric parameters.
2. 4 channel current and 4 channel voltage measurement, simultaneously capturing and recording electric parameters and waveform, to provide with all the power quality information for working.
3. Line voltage:Below 600V.
Technical Specifications
Power supply:Rechargeable lithium-ion battery packs 9.6V, backup charger.
Working Current:about 590mA, continuous working 8hours.
Display mode:LCD color screen, 640dots × 480dots, 5.6 inches, display field 116mm × 88mm
Instrument Size:240mm×170mm×68 mm.
CT Size:6000A Flexible Coil Current Sensor (with Integrator) : Ф300mm
Line Voltage:1.0V~2000V.
Phase Voltage:1.0V~1000V
Current:6000A Flexible Coil Current Sensor (with Integrator) : 10A ~ 6000A
Frequency:40Hz~70Hz.
Electricity Energy Parameter:W, VA, Var, PF, DPF, cosφ, tanφ.
Energy parameters:Wh, Varh, Vah.
Harmonic Wave:Yes, 0 - 50 times
Total harmonic distortion:Yes, 0 - 50 times, each phase
Expert Mode:Yes.
Transient Record Groups:150 groups
Voltage Flicker:Yes
Start Current Mode:Yes, 100 seconds
Three-phases Unbalance:Yes
Record:300 days (record 20 parameters simultaneously, every 5 seconds record 1 point) Min/Max Recorded Value:Yes, the max min value can be measured for a certain time Alarm:40 different types of parameter selection, 12800 group alarm logs
Peak:Yes.
Phasor Diagram Display:Automatic
Screenshot Capacity:60PCS
Communication Interface:USB.
Voltage Test Wire Length:3M
Current Clamp Wire Length:2M
❤❤Please refer to the pictures for other POA-3H parameters.❤❤
ProductDescription1 : The power quality analyzer measures currents and voltages and reports real-time RMS values for all 3-phases and neutral. In addition, the power meter calculates power factor, realpower, reactive power, and more. Mi550handheld three phase power quality analyzer, externally connected with open type Rogowski coil or voltage type CT, it can realize none dismantling wire test, simplify test steps, save construction cost, and is more convenient for engineering test as well as the inspection and maintenance of distribution system. * Support systems of single-phase and three-phase. It can measure multiple electrical parameters such as current, voltage, power factor, power, energy, and power quality parameters including harmonic, unbalance degree, voltage swell and voltage dip, etc. * In addition to the measurement function, Mi550 is equipped with various records, such as waveform records and programmable interval measurement value records. To store and record data, it is internally embedded 32 GB memory card. * With standard configuration of RJ45 Ethernet communication interface, through standard Modbus TCP protocol, it is compatible with various configuration systems and could transmit the electrical parameters collected by the front end to the system data center in real time. Type:Handheld Three phase power quality analyzer Current sensor:Rogowski coil,Voltage-output current clamp
ProductDescription2 : Mi550handheld three phase power quality analyzer, externally connected with open type Rogowski coil or voltage type CT, it can realize none dismantling wire test, simplify test steps, save construction cost, and is more convenient for engineering test as well as the inspection and maintenance of distribution system. * Support systems of single-phase and three-phase. It can measure multiple electrical parameters such as current, voltage, power factor, power, energy, and power quality parameters including harmonic, unbalance degree, voltage swell and voltage dip, etc. * In addition to the measurement function, Mi550 is equipped with various records, such as waveform records and programmable interval measurement value records. To store and record data, it is internally embedded 32 GB memory card. * With standard configuration of RJ45 Ethernet communication interface, through standard Modbus TCP protocol, it is compatible with various configuration systems and could transmit the electrical parameters collected by the front end to the system data center in real time.
ProductDescription3 : Type:Handheld Three phase power quality analyzer
ProductDescription4 : Current sensor:Rogowski coil,Voltage-output current clamp
ProductSiteLaunchDate : 2024-10-31T07:00:00.000Z
Size : Medium
SpecificationMet : CE
Style : Power Quality Analyzer
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41113600
UpperTemperatureRating : 50 degrees_celsius