Cart 2 india

Specification
Brand : Keenso
BulletPoint1 : [Temperature Resilience] Able to function in temperatures ranging from -10 to +60℃, this power meter is reliable in a range of operating conditions.
BulletPoint2 : [Multi-connector Support] The fiber optical power meter features 3 connector options and can measure 7 wavelengths, providing versatile compatibility for various setups.
BulletPoint3 : [Portable & Convenient] Powered by 3 aa batteries with easy switching, this power meter is portable and user-friendly for on-the- use.
BulletPoint4 : [Accurate Measurement] With high accuracy and quick response, this power meter delivers results, allowing for efficient troubleshooting and monitoring.
BulletPoint5 : [Robust Design] Resistant to shock and wear, this power meter is highly , ensuring long-lasting use even in demanding environments.
IncludedComponents : No
ItemName : Fiber Optical Power Meter SC FC ST Connector 800-1700 nm -70 ~ +3 db Resistant to Shock and Wear, High Accuracy Measurement for -10~60℃ Working Temperature (Optical power meter)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 23 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemTypeKeyword : industrial-power-meters
Manufacturer : Keenso
MeasurementAccuracy : 0.1mm
ModelName : Keenso93exihqykw-11
ModelNumber : Keenso93exihqykw-11
NumberOfItems : 1
PartNumber : Keenso93exihqykw-11
ProductDescription : Description:
1. The fiber optical power meter has 3 kinds of connector and can measuring 7 kinds of wavelength.
2. Resistant to shock and wear,very strong and .
3. The measuring is of high accuracy and the response is quick.
4. Can working normally at temperature -10~+60?.
5. Powered by 3 pcs AA battery,each to switch battery.

Specification
Item Type:Fiber Optical Power Meter
Wavelength Range: 800-1700
Connection Port: SC/FC/ST
Probe Range: IngaAs
Measuring Range: -70~+3db
Uncertainty: ±5%
Linear Display: 0.1%
Working Temperature: -10~60?
Storage Temperature: -25~70?
Automatic Shutdown Time: 10min
Battery:3 x AA Battery(Not Included)

Package List
1 x Power Meter
1 x Connector

Note
The LED display is weak and the boot cannot be displayed.
It may be because the battery is low, you can replace the battery in time.
LED display data is not normal?
It is possible that the connector is faulty, dirty or locked. Reconnect the connector and clean the sensor
How to the factory settings?
Press the in + zero button at the same time
The calibration steps are as follows:
1. Press the ? + LIGHT button at the same time, the nm at the end of the first line is not displayed.
2. Each time the LIGHT button is pressed, the power value is increased by 0.05dBm, and the power value is adjusted to the standard value by these two buttons.
3. Press the zero button to save
4. Restart the optical power meter or press the in + LIGHT
The nm at the end of the first line of the key is displayed and ready for use.
ProductSiteLaunchDate : 2024-04-02T17:24:08.361Z
Size : Optical power meter
Style : Optical power meter