EBD-A20H Battery Tester 30V 20A 200W Multifunction Direct Current Electronic Load Discharger Support PC Online Software Control

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 30400/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Generic
BulletPoint1 : Large LCD display, you can see the voltage, current, capacity, time, power, energy and other test data clearly.
BulletPoint2 : Four-wire detection, voltage test and current channel are separate wiring, to ensure measurement accuracy.
BulletPoint3 : 3 working modes settable design, you can set DSC-CC, DSC-CP, CHG-CV according to your demands.
BulletPoint4 : With multiple discharge mode, suitable for all kinds of battery capacity test and powersupply test.
BulletPoint5 : Support c-omputer online control, curve plotting, calibration benchmarking, firmware upgrade, cycle recharge/discharge etc..
Color : One Color
ItemName : EBD-A20H Battery Tester 30V 20A 200W Multifunction Direct Current Electronic Load Discharger Support PC Online Software Control
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-power-meters
Manufacturer : Lifyn2
Material : plastic
MeasurementAccuracy : 1
ModelName : FFUQSPSUB
ModelNumber : FFUQSPSUB
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FFUQSPSUB
PowerSourceType : Ac
ProductDescription : Specifications:

Material: aluminum alloy

Voltage setting: Discaharge: 0.00-30.00V, the minimum step 0.01V

Current setting: Discharge: 0.10-20.00A Minimum step 0.01A (automatic limit current when power is overrun)

Recharge: 0.10-5.00A Minimum step 0.01A (the maximum current is less than the s-upply current when the voltage is above 10V )

Mode setting: DSC-CC: the discharge current is constant, it can be used to test the battery capacity or powersupply current

DSC-CP: the discharge power is constant, it can be used to simulate constant power equipment or test the power of powersupply

Voltage test:
0.000-4.500V (low pressure gear) accuracy to 0.003V, error ±0.5%
4.50V-30.00V (high presure gear) accuracy to 0.01V, error ± 0.5%

Current test: 0.10-20.00A, accuracy to 0.01A, error ± 0.5%

Capacity test:
10Ah, the resolution is 0.001Ah
10Ah-100Ah, the resolution is 0.01Ah
above 100Ah, the resolution is 0.1Ah

Discharge power: max 200W

Connection: four-wire detection, voltage test and current channel are separate wiring, to ensure measurement accuracy

LCD display: voltage, current, capacity, time, power, energy and other test data

C-omputer Online: dedicated USB to TTL serial port (not an ordinary USB cable) support c-omputer control, curve plotting, calibration benchmarking, firmware upgrade, cycle recharge/discharge etc..
ProductSiteLaunchDate : 2023-12-13T10:21:50.913Z
Size : One Size
UnitCount : 1

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.