Digital Power Meter with External Power Cell PCE-DFG NF 5K from PCE Instruments

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 270300/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : PCE Instruments
BulletPoint1 : USB interface
BulletPoint2 : Graphic display
BulletPoint3 : Fast response time
BulletPoint4 : PC software
BulletPoint5 : Memory for 100 measurements
Color : Multi
ConnectivityProtocol : X-10
ConnectorType : Usb
CurrentRating : 8 amps
ExternallyAssignedProductIdentifier : 4250348719423
ExternallyAssignedProductIdentifier1 : 814192028076
ExternallyAssignedProductIdentifier2 : 0814192028076
Hazmat : auto-grounding
IncludedComponents : No
InputVoltage : 8 volts
ItemName : Digital Power Meter with External Power Cell PCE-DFG NF 5K from PCE Instruments
ItemPackageDimensions_Height : 15 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 20 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-power-meters
Manufacturer : PCE Deutschland GmbH
Material : Acrylonitrile Butadiene Styrene (ABS)
MaximumSwitchingVoltage : 30 volts
MeasurementAccuracy : 0.1mm
MeasurementSystem : Metric
ModelName : Garosaf1uyo5ihmk
ModelNumber : PCE-DFG NF 5K
MountingType : Flush Mount
NumberOfBoxes : 1
NumberOfItems : 1
OperatingVoltage : 600 volts
OperationMode : Automatic
PackageLevel : unit
PartNumber : PCE-DFG NF 5K
PowerSourceType : manual
ProductDescription : The dynamometer with an external load cell is designed for the measurement of compressive forces at hard-to-reach measuring points. The pressure cell is connected to the dynamometer by a sensor cable of approx. 3 m length and thanks to the small cell dimensions it ensures a versatile application. The dynamometer or the load cell has on the bottom of several threaded holes that allow a firm installation.

Technical specifications
Measuring range: 0 ... 5 kN / 5,000 N / 500 kg / 1,124 lbs
Resolution: 0.5 N / 0.1 lbs
Accuracy: ± 0.5% of the measuring range
Measurement units: N, kg, lb, kPa
Display: 2.8" TFT graphic display
Alarm Modes: Inside, Outside, Crack, Shutdown
Sampling rate: 6 ... 1600 Hz
Storage: 100 measurements
Power supply: NiMH battery, 6V / 1600-mAh
Battery life: About 10 hours
Power adapter / charging adapter: 12V / 1A
Outputs Interface: USB switching output: 12V / 50-mA
Protection class: IP 54
Operating and storage conditions: -10 ... 50°C / -14 ... 122°F, 5 ... 95% rh non-condensing
Dimensions pressure cell: Ø 32 mm / H 16 mm / M5 thread
Cable length pressure cell: About 3 m / 9.8 ft
Dimensions: 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in
Weight: 540 g / 1.2 lbs

Delivery content
1 x Dynamometer PCE-DFG NF 5K 1 x Load cell (depending on model) 1 x USB cable 1 x Charger 1 x PC software 1 x User manual
ProductDescription1 :

Package inlcuded:

0-2A Current and 0-30V voltage collector(Please select the version you need)

 

Description:

 

Power supply voltage: DC 8-25V(12V recommended);

Operating current: 8-13MA;

MODBUS RTU protocol: 03 read command, 06/16 write command.

Serial port Baud rate: 1200 2400 9600(default) 19200 38400 57600 115200 ,N/E/O,8,1;

By modifying the RS485 address, up to 247 modules can be cascaded (more than 16 please use R485 repeater);

Voltage and current values can be read;

Current measurement range: 0~1A, 0~2A, and 0~5A. It is recommended to select a version with a smaller range within the range that meets the measurement;

Voltage measurement range: 0~30V;

Measurement accuracy: 1%. If the read value is too different from the actual value, recalibrate

Size: 72X 47 X 12MM(only board),87X 50X 37MM(with case)

Weight: 23g(board only),68g(with case)

Note:

This product is used to collect small current signals from time to time. If you need a 4-20MA signal collector, please choose the following products: N4AIA04 N46IB02 N43IC04

Note: The module will restore factory settings and restart automatically after 5 seconds of shorting the RES port.

MODBUS RTU protocol please refer to : '' N4VIA02 Modbus RTU''


ProductDescription2 :

For more information, please contact me

DIN rail Box parameters:

Product model: UM72

Color: Green

Width: suitable for PCB board width UM72(72mm)

Insulation grade: flame-retardant VO grade

Backplane length: suitable for 47 mm PCB boards

Net weight: 45g

Installation: DIN35 and C45 rail

 

 

Application

 

PLC IO expansion board

Smart Home,Home Automation ,Wiser Home;

Current and voltage monitoring of industrial control equipment

Security Monitoring

Identification system;

Current and voltage meters

LED Lamp Drivers

Automatic curtain control

Wiring Diagram:

1 Only measure 0-30V voltage signal

2 Only measure 0.04-1/2/5A current signal (the voltage of current signal can be DC 0-110V)

3 Measure voltage and current signal


ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2021-08-13T13:37:24.393Z
SpecificationMet : ABS
StreetDate : 2023-01-08T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161600

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.