Cart 2 india

Specification
Amperage : 80 amps
BatteriesRequired : 1
Brand : TeslaTap
BulletPoint : Tripp Lite PINV2000HS Power Inverter - Input Voltage: 12 V DC - Output Voltage: 110 V AC, 115 V AC, 120 V AC, 5 V DC
BulletPoint1 : MADE IN USA - Original TeslaTap MINI 80 – Up to 80 AMPs at 250VAC (20KW).
BulletPoint2 : Compatible – Can be used with ALL Generations of Tesla Chargers so you can connect your EV to ANY Tesla High Power Wall Connector, Destination Charger, or Universal Mobile Connector.
BulletPoint3 : Tough – Completely machined from 100 percent Delrin (Acetal Homopolymer) to very high tolerances and connections are fully encased and sealed internally for protection and can even be driven over and continue to operate.
BulletPoint4 : Small - Less than 5” in total length (only extends 3.5” when inserted into EV) and has two Locking levers to give you the ability to lock it to your EV and/or your Tesla connector and can be easily stored in your EV glove box when not in use.
BulletPoint5 : Warranty - TeslaTap's are protected for 1 year against manufacturing defects and have a direct US customer service phone number.
BulletPoint6 : Part number: SPCNCTTM80
Color : Multicolor
CompatibleDevices : Tesla Chargers and Connectors
Configuration : Heavy-Duty
ConnectivityTechnology : 2 Pin electrical connection
ConnectorType : J-1772
ControlMethod : touch
CurrentRating : 80 amps
CustomerPackageType : Standard Packaging
ElectricalOutputWaveform : pure_sine_wave
ExternallyAssignedProductIdentifier1 : 758614088678
ExternallyAssignedProductIdentifier2 : 0758614088678
ExternallyAssignedProductIdentifier3 : 00647912105791
FrequencyRange : ~60 Hz
IncludedComponents : 1 x Mini Seat, 2 x Screws
InputVoltage : 240 volts
InverterCapacityVoltAmp : 2000
IsPortable : 1
ItemDisplayDimensions_Height : 12 inches
ItemName : TeslaTap Mini - Tesla to J-1772 Adapter - 80 AMP - Made in USA (TTMINI80)
ItemPackageDimensions_Height : 16.9926 centimeters
ItemPackageDimensions_Length : 8.2042 centimeters
ItemPackageDimensions_Width : 10.9982 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-power-inverters
Manufacturer : TeslaTap
Material : Plastic
ModelName : Schneider Electric 81-2530-12 2500W Inverter and 3-Stage Battery Charger
ModelNumber : TTMINI80
MountingType : Wall Mount
NumberOfItems : 1
NumberOfPorts : 1
NumberOfPowerLevels : 1
NumberOfWires : 1
OutputCurrent : 80 amps
OutputVoltage : 250 volts
PackageLevel : unit
PartNumber : SPCNCTTM80
PeakOutputPowerWatts : 2500
PowerPlugType : type_a_2pin_na
PowerSourceType : AC
ProductDescription : Authentic TeslaTap MINI 80 AMP Version – MADE IN USA .... YES, THIS ADAPTER DOES WORK ON ALL WALL CONNECTORS and DESTINATION CHARGERS including Gen2 and Gen3. The TeslaTap MINI has O-Ring seals on all Tesla and J-1772 pins and is virtually waterproof. TeslaTap adapters have a special circuit that allows you to charge your non-Tesla EV on ANY Tesla Destination, UMC, or High Power Wall Connector. Safety is the most important issue and our adapters have all of the pins needed to maintain full functionality and safety protocols used by both Tesla and J-1772 charging systems. This adapter is NOT COMPATIBLE and will not work with the Tesla Supercharger Network. We do not list all of the vehicles that are compatible as our bypass circuit makes the TeslaTap MINI 80 compatible with ALL US built EV’s with a continuous charge rate up to 80 AMPS @ 250V (20 Kw). TeslaTap has a US Customer Support line that you can call or email if you have any type of issue using their adapters. Clarification: Tesla is the registered trademark of Tesla Inc. and is not affiliated with TeslaTap.
ProductSiteLaunchDate : 2021-01-18T15:07:09.410Z
RecommendedUsesForProduct : Recreational Vehicle
Size : 80 AMP MINI
Strands : copper
StreetDate : 2019-03-20T00:00:01Z
Style : Recharges
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25175000
Voltage : 250 volts_of_alternating_current
WarrantyDescription : Manufacturer warranty for 1 year from date of purchase
Wattage : 20000 watts