Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
Charge 4 AAs @ 100mA charge rate with this panel!These PowerFilmTM flexible solar modules can be used alone to direct-power your small DC project (anything that runs off 7.2V or less and requires 100mA of current or less) - or, they can be used in your battery-charger project to store energy for later use. BATTERY-CHARGING TIPS.For battery charging, the voltage of your solar panel MUST be higher than the voltage of the battery that you want to charge. We recommend using the following guidelines: at least 2.0 volts to charge one 1.2 volt battery ,at least 3.6 volts to charge two 1.2 volt batteries wired in series ,at least 4.8 volts to charge three 1.2 volt batteries wired in series ,at least 6.0 volts to charge four 1.2 volt batteries wired in series.Multiple panels can be wired together to increase voltage or current, and the panels can be cut (following directions!) for your special project.Each module is encapsulated in 3 mil clear polyester film.Specs: Output 100mA @ 7.2V ,Open-circuit voltage: 10.5V ,Measures approx. 3" X 10"
Specification
Binding : Electronics
Brand : PowerFilm, Inc.
EAN : 0791583766024
Label : Powerfilm
Manufacturer : Powerfilm
ProductGroup : Wireless
ProductTypeName : CONSUMER_ELECTRONICS
Publisher : Powerfilm
Studio : Powerfilm
Title : Powerfilm 7.2V 100mA Flexible Solar Panel MP7.2-75 by "PowerFilm, Inc."
Charge 4 AAs @ 100mA charge rate with this panel!These PowerFilmTM flexible solar modules can be used alone to direct-power your small DC project (anything that runs off 7.2V or less and requires 100mA of current or less) - or, they can be used in your battery-charger project to store energy for later use. BATTERY-CHARGING TIPS.For battery charging, the voltage of your solar panel MUST be higher than the voltage of the battery that you want to charge. We recommend using the following guidelines: at least 2.0 volts to charge one 1.2 volt battery ,at least 3.6 volts to charge two 1.2 volt batteries wired in series ,at least 4.8 volts to charge three 1.2 volt batteries wired in series ,at least 6.0 volts to charge four 1.2 volt batteries wired in series.Multiple panels can be wired together to increase voltage or current, and the panels can be cut (following directions!) for your special project.Each module is encapsulated in 3 mil clear polyester film.Specs: Output 100mA @ 7.2V ,Open-circuit voltage: 10.5V ,Measures approx. 3" X 10"
Specification
Binding : Electronics
Brand : PowerFilm, Inc.
EAN : 0791583766024
Label : Powerfilm
Manufacturer : Powerfilm
ProductGroup : Wireless
ProductTypeName : CONSUMER_ELECTRONICS
Publisher : Powerfilm
Studio : Powerfilm
Title : Powerfilm 7.2V 100mA Flexible Solar Panel MP7.2-75 by "PowerFilm, Inc."
