Cart 2 india

Specification
Brand : cjc
BulletPoint : Carbide-tipped port tools offer the strength and wear resistance of carbide steel on just the
BulletPoint1 : All copper AC electric motor, stable operation.Please do not test the capacity of this machine with steel bars exceeding the size and hardness
BulletPoint2 : High efficiency, cut off time 2-3 seconds.Before cutting the steel bar. The position of the screw must be adjusted
BulletPoint3 : Large factory products, high quality.Regular replacement of the blade position, a pair of cutter heads can be used on all four sides, cut 1000 times per side
BulletPoint4 : Cut off without sparks, no dust, safer. Clean the motor commutator once a month and clean it with an air gun. And check the carbon brush
BulletPoint5 : A variety of models to choose, more convenient. After the machine has been cut 70 times in a row, wait for the machine to cool before using it
Color : 16L
ExternallyAssignedProductIdentifier : 7003016980963
ItemName : Rebar Cutter, Electric Rebar Steel Shear Cutter Hydraulic Cutting Machine Rebar Cutter φ4-25mm (16L, 220V)
ItemPackageQuantity : 1
ItemTypeKeyword : port-contour-cutters
Manufacturer : Hengwei
Material1 : steel
Material2 : carbide_tipped
ModelNumber : SRC-2393
NumberOfItems : 1
PartNumber : HW-Hydraulic Cutting
ProductDescription :

Machine Name:

Rebar Cutter, Electric Rebar Steel Shear Cutter Hydraulic Cutting Machine Rebar Cutter φ4-25mm

Features:

1, All copper AC electric motor, stable operation

2, high efficiency, cut-off time 2-3 seconds

3, large factory products, high quality

4, cut off without sparks, no dust, safer.

5, A variety of models to choose from, more convenient.

Parameters:

Voltage: AC 220V or AC 110V

Cutting range: 4-16mm, 4-20mm, 4-25mm

Cutting time: 2-4 seconds

Other parameters: as the picture shows

Precautions:

1. Please do not test the capacity of this machine with steel bars exceeding the size and hardness.

2. Before cutting the steel bar. The position of the screw must be adjusted

3. regular replacement of the blade position, a pair of cutter heads can be used on all four sides, cut 1000 times per side

4. replace the hydraulic oil every 3 months

5. Clean the motor commutator once a month and clean it with an air gun. And check the carbon brush.

6. Keep the top hole of the machine unobstructed to prevent blockage.

7. After the machine has been cut 70 times in a row, wait for the machine to cool before using it.

8. If the machine is stuck, open the pressure relief valve and return the machine. You cannot force the cut to continue.

Package include:

1x Electric Rebar Cutter

ProductSiteLaunchDate : 2022-07-18T08:27:40.981Z
Size : 220V
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 41110000