Cart 2 india

Specification
Brand : Alphatool
BulletPoint1 : Threaded Inlet Strainer Kit: You will receive a tank pool filter and 5 pieces of screws, through which the filter pump and plunger valve are connected to the tank, which can prevent leaves, hair and other impurities from entering the filter pump and keep the pool water clear.
BulletPoint2 : Easy to Use: You only need to make a 2.3 inch hole in the tank wall in advance. Put the strainer nut, threaded filter Inlet, plastic gasket and a soft rubber washer inside the pool wall, and the high profile nut with another rubber washer outside the pool wall to connect and tighten. Then connect a plunger valve with an outer diameter of 2-3/8inch thread on the outside, and finally connect a 1-1/2inch filter pump water pipe through the plunger valve.
BulletPoint3 : Durable Material: Our stock tank pool filter kit is made of high-quality ABS plastic, which is wear-resistant and corrosion-resistant, sturdy and durable, you can choose with confidence.
BulletPoint4 : Good Sealing: Our inlet strainer can provide a good seal, and you can also use the included screws to fix the high profile nut and soft rubber washers to enhance the seal. In addition, you can also apply a layer of sealant to strengthen the seal of the filter. You don't need to worry about water leakage when using it.
BulletPoint5 : Wide Range of Applications: It is suitable for above ground swimming pools and stock tank pools, better to let the water circulate in your pool, let you enjoy a happy and good time in a clean pool. It is a practical stock tank pool accessory.
Color : White
ExternallyAssignedProductIdentifier : 5784118308979
ExternallyAssignedProductIdentifier1 : 806105061546
ExternallyAssignedProductIdentifier2 : 0806105061546
ExternallyAssignedProductIdentifier3 : 00806105061546
IncludedComponents : Waterway Spa Wet End 1 Hp C.D. 1.5" 9X5X9-4Lbs
IncludedComponents1 : A strainer nut
IncludedComponents2 : a threaded filter inlet
IncludedComponents3 : a plastic gasket
IncludedComponents4 : two soft rubber washers
IncludedComponents5 : a high profile nut
ItemDisplayDimensions_Height : 5.4 inches
ItemDisplayDimensions_Length : 6.9 inches
ItemDisplayDimensions_Width : 6.5 inches
ItemDisplayWeight : 1.68 pounds
ItemName : Threaded Inlet Strainer Kit, Stock Tank Pool Filter Kit Replacement Fittings with Rubber Washer and Strainer Nut for Intex Filter Pumps W/ 1-1/2" Hoses
ItemPackageDimensions_Height : 10.3124 centimeters
ItemPackageDimensions_Length : 9.398 centimeters
ItemPackageDimensions_Width : 9.4996 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : swimming-pool-and-spa-replacement-parts
ItemTypeName : Stock Tank Pool Pump Kit
Manufacturer : Alphatool
Material : ABS plastic
ModelName : Stock Tank Pool Pump Kit
ModelNumber : Alphatool-stock.tank.pool.filter-1pc
NumberOfItems : 1
PartNumber : Alphatool-stock.tank.pool.filter-1pc
ProductDescription : Are you still troubled that the impurities in the stock tank pool will enter the filter pump, causing damage to the filter pump and dirty pool water?
Come take a look at our stock tank pool filter kit!
It can effectively prevent impurities from entering the filter pump, keeping your pool water always clean and fresh.
Product Information:
Color: White
Size: 3.54 inches diameter
Package includes: A strainer nut, a threaded filter inlet, a plastic gasket, two soft rubber washers, a high profile nut and five screws
Applicable accessories: 2-3/8inch threaded plunger valve;1-1/2inch filter pump hose
Features:
Can withstand high water pressure, durable.
With grille, effectively filter impurities.
Detachable design, easy to install.
For filter pumps with threaded hose connection.

ProductSiteLaunchDate : 2023-03-23T02:43:56.664Z
Size : 4 lb
Style : Above Ground
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1