POOLSAIC Drop-in Hibiscus Vinyl Swimming Pool Mat (59" x 59")

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 51800/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Poolsaic
BulletPoint1 : Brightly colored, realistic mosaic pattern
BulletPoint2 : 59 inches across entire width
BulletPoint3 : Clings to smooth pool floors
BulletPoint4 : REMOVE BEFORE COVERING POOL OR ADDING CHEMICALS
BulletPoint5 : NOT FOR USE IN INDOOR POOLS, SPAS, OR HOT TUBS
Color : Green
ExternallyAssignedProductIdentifier1 : 0759838077820
ExternallyAssignedProductIdentifier2 : 759838077820
ItemName : POOLSAIC Drop-in Hibiscus Vinyl Swimming Pool Mat (59" x 59")
ItemPackageDimensions_Height : 7 inches
ItemPackageDimensions_Length : 60 inches
ItemPackageDimensions_Width : 60 inches
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : swimming-pool-and-spa-replacement-parts
Manufacturer : Poolsaic
Material : Vinyl
NumberOfItems : 1
PartNumber : 67B00-00067
ProductDescription : 1. Only for TCELL-15, not fit T-9 or T-5 or T-3.
2. The chlorine production time is based on the set “Desired Output %”. If your current setting is 50%, the control board to produce chlorine for 1h, and stop for 1h, and cycle this step continuously. No need to manually reset and restart the device! If you set it to 100% (Super Chlorinate ) control board will continue to produce chlorine without stopping. If you need better results, keep it above 70%.
3.Frequently Asked Questions and Answers
A.Check Salt and Inspect Cell LED flashing or ON
-Wrong T-cell , only fit TCELL-15.
-Low salt level (2700-3400ppm is great)
-TCELL-15 need to Clean
B.How to read ppm correctly on the new board
-Press Diagnostics button 5 times to display”-xxxx”,when this salt level is down to correct , Push cycle slide main switch for Auto -> Super Chlorinate->Auto.
C.High Salt LED ON
-Verify salt level is 2700-3400ppm and check with independent test to ensure accuracy.
D.No Flow led ON
-Make sure Flow switch is installed ok.
-Bad flow switch.
E.Stop make chlorinate
-“Desired Output %” set too small
-Pump Time clock set too small.
-Low salt level
-High salt level
-No flow
-Bad T-CELL /wrong T-cell
-Water is too hot /cold
-Power voltage is too low

Size : XL
Style : Tropical
SupplierDeclaredDgHzRegulation : not_applicable

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.