Cart 2 india

Specification
Brand : Custom Molded Products
BulletPoint1 : Skimmer Cover And Collar (Round) Tan
BulletPoint2 : 25544-919-000
BulletPoint3 : MINOR CRACKS ONLY - Works best on small fissures. Not recommended the rate of water loss exceeds one inch per day.
BulletPoint4 : DOSAGE - One quart per 15,000 gallons of water.
BulletPoint5 : MULTIPLE USES – Perfect for hot tub spas and in-ground swimming pools. The quick sealer is not recommended for those with vinyl pools.
Color : Tan
Directions : Turn pump off. If available, set the filtration system to ‘By-Pass’ or ‘Recirculate’ to avoid the product from passing through the filtration system when the pump is running. Remove filter grids or cartridge. If the leak location is unknown, add the recommended dosage to the skimmer. If you are sure of the location of the leak, pour the recommended dosage directly into the water at the area of the leak. Where possible, attach a vacuum hose with the vacuum head resting at the deepest end of the pool/spa to allow for optimum effect when the pump is turned back on. After 30 minutes following the application, turn pump on and allow to run for at least 8 hours. Check pool/spa to see if it is still losing water. A second application may be necessary and can be made within the next 24 hours. Replace filter grids or cartridges after 24 hours and resume normal filtration. You can then enter your pool/spa 24 hours after application.
ExternallyAssignedProductIdentifier1 : 0849640009871
ExternallyAssignedProductIdentifier2 : 849640009871
ItemDisplayDimensions_Height : 2.7 inches
ItemDisplayDimensions_Length : 10.8 inches
ItemDisplayDimensions_Width : 10.8 inches
ItemDisplayWeight : 1.26 pounds
ItemForm : Liquid
ItemName : Custom Molded Products Skimmer Cover and Collar (Round) Tan
ItemPackageDimensions_Height : 2.7 inches
ItemPackageDimensions_Length : 10.8 inches
ItemPackageDimensions_Width : 10.8 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : swimming-pool-and-spa-replacement-parts
ItemTypeName : Side Mount Valve
Manufacturer : Custom Molded Products
Material : Acrylonitrile Butadiene Styrene
ModelName : SPX0710X32
ModelNumber : 25544-919-000
PartNumber : 25544-919-000
ProductBenefit : Fast and easy leak repair for spas and swimming pools
ProductDescription : Custom Molded Products Skimmer Cover and Collar (Round) Tan
ProductSiteLaunchDate : 2021-08-17T05:35:07.944Z
Size : Single Pack
Style : Custom
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 32