Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : Pool Above
BulletPoint1 : Vinyl Patch Kit Compatible with Intex Easy Set Pool 8'x30" Includes:
BulletPoint2 : 1 fl oz (30ml) tube of vinyl cement, 1 Glue Applicator
BulletPoint3 : (8) 3.125" Circle Patches
BulletPoint4 : (2) 7.75" x 3.75" transparent patches
BulletPoint5 : Measures Approximately: Width: 5-1/4 inches ~ Length: 2-1/2 inches ~ Height: 3-1/2 inches ~ Slot Width: 9/16 inch ~ Slot Height: 15/16 inch
Color : Light Pink
IsAssemblyRequired : 1
ItemDisplayDimensions_Height : 8 inches
ItemDisplayDimensions_Length : 6 inches
ItemDisplayDimensions_Width : 0.5 inches
ItemDisplayWeight : 0.15 pounds
ItemForm : Solid
ItemName : Repair Kit for Easy Set, Fast Set, Frame Set Pool Liner | Vinyl Patches and Glue
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 0.5 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : swimming-pool-maintenance-kits
Manufacturer : Pool Above
Material : Vinyl
Material1 : Pleated Microglass media
Material2 : Pleated Microglass media
Material3 : Pleated Microglass media
Material4 : Pleated Microglass media
Material5 : Pleated Microglass media
ModelNumber : RFGD-SS-BRONZE-20-Pack
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 29745+24895
ProductDescription : At Pool Above, we are obsessed with getting the best possible repair for your inflatables. We understand that patches hold best when they are adhered to the same materials. This is why we destroy perfectly good products to create our patch kits. This repair kit works well for most vinyl repairs, but is designed specifically for Intex Easy Set Pool liners. It includes one Pool Above Glue Kit (24895) and eight light pink 3.125" circle vinyl patches. The glue kit includes two complimentary 9.5cm x 20cm clear vinyl sheets along with 1 fl oz. (30ml) tube of vinyl cement and applicator. Please follow the instructions and watch the video for the best possible hold. Recommended age 14+ Application instructions: Clean all surfaces to be patched thoroughly using a vinyl surface cleaner. Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling. Light gauge vinyl & inflatable pools: Apply the adhesive sparingly to patch, covering it evenly all over. Heavy gauge vinyl & pool liners: Apply the adhesive liberally to patch, covering it evenly all over. Out of the water: Apply patch to cover damaged area being sure to press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength. Under water: keep patch folded onto itself over the area to be repaired, then unfold patch and apply immediately. Carefully press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength. Tip: If your damaged area is on a seam, add an additional bead of glue to the seam before applying the patch.
ProductSiteLaunchDate : 2017-06-11T21:53:46.835Z
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 20