Cart 2 india

Specification
Brand : Pentair
BulletPoint : Lid Knob, Speck 21-80 BS, with Bolt.
BulletPoint1 : 476000 Pentair Blower Replacement Kit For ETI 400
BulletPoint2 : The blower should come on immediately, and after about 15 seconds, the burner should fire. When operating for the first time, the burner may not fire on the first try because of air in the gas line. If it does not fire at first, push the OFF switch, wait five minutes, and again push the POOL or SPA ON switch. The burner should fire after about 15 seconds. You may have to repeat this until all of the air has cleared the gas line.
BulletPoint3 : The burner should fire until the pool/spa temperature reaches the desired temperature set on the thermostat. The blower will continue to run for about 45 seconds after the burner shuts off. If any of the safety interlocks should open during burner operation, the burner shuts off immediately, but the blower continues to run for about 45 seconds. Should overheating occur or the gas supply fail to shut off, turn off the manual gas control valve to the appliance.
BulletPoint4 : A full compatibility overview can be found in the description
BulletPoint5 : Bestway Part Number P61780
Color : Gray
ExternallyAssignedProductIdentifier1 : 0788379882266
ExternallyAssignedProductIdentifier2 : 788379882266
ExternallyAssignedProductIdentifier3 : 00788379691783
ItemDisplayDimensions_Height : 6 inches
ItemDisplayDimensions_Length : 14 inches
ItemDisplayDimensions_Width : 10 inches
ItemDisplayWeight : 1 pounds
ItemName : Pentair Blower Replacement Kit for ETI 400 High-Efficiency Pool and Spa Gas Heater 476000
ItemPackageDimensions_Height : 0.5 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : swimming-pool-heater-and-heat-pump-parts
ItemTypeName : Blower
Manufacturer : Pentair
Material : metal
ModelName : Blower Kit
ModelNumber : 476000
MountingType : Flange Mount
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 476000
PowerSourceType : 手动
ProductDescription : The blower should come on immediately, and after about 15 seconds, the burner should fire. When operating for the first time, the burner may not fire on the first try because of air in the gas line. If it does not fire at first, push the OFF switch, wait five minutes, and again push the POOL or SPA ON switch. The burner should fire after about 15 seconds. You may have to repeat this until all of the air has cleared the gas line. The burner should fire until the pool/spa temperature reaches the desired temperature set on the thermostat. The blower will continue to run for about 45 seconds after the burner shuts off. If any of the safety interlocks should open during burner operation, the burner shuts off immediately, but the blower continues to run for about 45 seconds. Should overheating occur or the gas supply fail to shut off, turn off the manual gas control valve to the appliance.
ProductDescription1 : 42002-0024S fits Pentair Sta-Rite Max-E-Therm pool and spa heater electrical systems model SR200, SR333, SR400
ProductDescription2 : 42002-0024s stack flue sensor replacement
ProductDescription3 : 2pk-42002-0024S Pool Spa Heater Replacement for Pentair Stack Flue Sensor
ProductSiteLaunchDate : 2018-01-05T17:17:07.149Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1