Cart 2 india

Specification
Brand : BJTDLLX
BulletPoint1 : 【Material】The upper part of the hot tub handrail is made of aluminum, and the lower part is painted steel pipe. High hardness, impact resistance, not easy to deform, waterproof and corrosion resistance, durable.
BulletPoint2 : 【Sturdy & Stable】The hot tub handrail is firmly installed and has a strong load-bearing capacity. Coated sturdy and stable support feet, coated aluminum handrails, to avoid rust.
BulletPoint3 : 【Variable Height】The spa side armrest can adjust the upper position of the rail and change to different heights according to your spa size. 46.7*11.3*120-156cm (18.39*4.45*47.24-61.42inch).
BulletPoint4 : 【Easy to Install】Spa armrests are easy to use and assemble. Pre-drilled holes in the base plate make installation quick and easy. The included socket head cap screws and wrench help you easily assemble the armrest.
BulletPoint5 : 【Wide Use Occasion】Spa railings are ideal for spas, outdoor swimming pools, indoor hot tubs, etc. Armrests reduce the risk of slipping when your hands are wet.
Color : Black
ExternallyAssignedProductIdentifier1 : 0840671116262
ExternallyAssignedProductIdentifier2 : 840671116262
ExternallyAssignedProductIdentifier3 : 00840671104368
FinishType : Painted
ItemDisplayDimensions_Length : 77 inches
ItemDisplayWeight : 17 pounds
ItemName : BJTDLLX Hot Tub Handrail, 61" Adjustable Spa Handrail Spa Side Safety Rail Bathroom Bathtub Rail Grab Bar Shower Tub Handle, Hot Tub Hand Rail Black Spa Safety Rail for Spa, Indoor/Outdoor Bath
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 57 inches
ItemPackageDimensions_Width : 39 inches
ItemPackageQuantity : 1
ItemTypeKeyword : swimming-pool-handrails
ItemTypeName : Hot Tub Handrail
Manufacturer : BJTDLLX
Material : Aluminum
ModelName : Hot Tub Handrail
ModelNumber : Hot Tub Handrail
NumberOfItems : 1
PartNumber : FE-ML-F9MT-WXF
ProductDescription :

Product Parameters:

Product Size: 46.7*11.3*120-156cm (18.39*4.45*47.24-61.42inch)

Installation Steps:

1> Choose Your Favourite Position of the Tub, Push the Flat Foot Under the Tub. Twist 6 Wood Screws on the Ground Through the Holes on the Foot.

2> Put the Pvc Stopper to the Middle of the Connecting Tube, and Put the Connecting Tube into the Support Feet Until the Stopper Meet the Top of Support Foot.

3> Put the Square Cover (Cabinet Connecting Kit) on the Connecting Tube Until It Slide on the Pvc Stopper, 2 Half Round Holes Should Face the Cabinet.

4> Put the Handrail on the Connecting Tube, Choose the Suitable Height by Moving the Pvc Stopper, Fasten the Pvc Stopper by 4 Tek Screws Finally.

5> Put the Flat Plate (Cabinet Conecting Kit) on the Tub Wall to Face the Square Cover, Tighten It on the Tub Wall by 4 Wood Screws. Twist 1 Set of Nut & Washer to the Bottom of Shafts, Let the 2 Shafts Meet the 2 Half Round Holes. 

6> Twist the 2nd Sets Nuts & Washer on the 2 Shafts, Twist All the Nuts (in & out of Square Cover) to Fasten the Square Cover.

7> Fasten the Cover with Tube Through the Screw Hole on the Cover by 1 Tek Screw, and Fasten the Hand Rail with Connecting Tube by 3 Tek Screws Through the 3 Holes on the Handrail.

8> Push the Big Plug on the End of Handrail, All Small Black Caps on All the Screw Heads, Assemble Completed.

 

Packing List:

Cabinet Free Support Bracket*1

Handrail Tube*1

Cabinet Bracket*1

Pvc Pivot Stopper*1

2/5"" Nuts（M10）*4

2/5"" Washers*4

Foam Grip*1

Tube End Cap*1

1"" Black Tek Screw（5* 18mm）*6

1"" Wood Screw（5* 30mm）*10

Black Pvc Push Cap*12

Phillips Driver（5* 60）*1

Drill Bit（3.2mm）*1

ProductSiteLaunchDate : 2022-08-18T03:05:57.130Z
Size : 4 Feet
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1