Specifications:
Quantity: 2 pack
Length: 8-1/2"
Outside Diameter: 4-15/16"
Top End: Handle
Bottom End: 1-2/3" Female Sae
Filter Media: Pleated Fabric
Filtration Area: 35 sq. ft.
This filter is known to fit some / all spa models from the manufacturers listed below. Before purchasing, Please check the measurements of your filter to see if they match the dimensions listed.
Water way Plastics, Nor dic Hot Tubs, Ma ster Spas, Garden Lei sure, Rising Dra gon Spa, D own East, Four W inds , Ft. Wa yne Spas, Hy dro Pool Industries, Premium Lei sure, rising dra gon, Se renity Spas and other manufacturers.
Replacement Part Numbers:
Plea tco PWW35L, PWW35L-M;
Uni cel 4CH-935, 4CH-935RA;
Water way Plastics 817-4035, Water way Tele weir 35 SF;
Spa-Dad dy SD-01235, PDC580-AFS, SD-01310, PDY35P3;
Ma ster Spa X268548 PMA-R3;
Ba leen AK-90082; Ti er1 PAS-1612, PAS-1613;
Fil bur FC-0170; Nor dic T-35; 090164999852; PoolP ure PLF4CH-935.
What is special about this pleated fabric filter?
High Quality Filtration
High-durability filter fabric retains strength even when laden with sediment, as well as a tighter porosity and denser weave to capture more residual chlorine, odor, and other impurities in less time, to keep your pool & spa water crystal clear.
Widely Used
This filter element is commonly used in swimming pools, spas, hot tubs, pumps, and other scenarios to give a clean water environment for you and your family to enjoy a comfortable leisure time.
Long service time
The spa filter can produce lower pressure and higher flow rates, causing less wear and tear on the pump and ensuring a longer product life while achieving the best flow and filtration effect.
Easy Installation and Maintenance
Replace your filter when the filter pressure gauge increases in PSI [pounds per square inch] and the time between cleanings falls:
1. Turn off the power to your pump and bleed the system's surplus air.
2. Pressure using the air valve on the filter.
3. Remove any band clamps and/or lids to your filter.
4. Remove the cartridge from the filter canister and dislodge any loose debris.
5. Return the cartridge to the filter tank after thoroughly rinsing it with fresh water. Secure the tank lid and any band clamps.