Cart 2 india

Specification
Brand : Generic
BulletPoint1 : The hard protective layer is resistant to wear and and can be used in harsh working environments.
BulletPoint2 : The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes.
BulletPoint3 : The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder.
BulletPoint4 : The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work.
BulletPoint5 : This is a double‑acting clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can 200mm/s.
ItemName : Pneumatic Swing Clamp Cylinder, Simple Structrue Pneumatic Cylinder, for Easily Install Harsh Working Environments (ACK63-90L)
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemTypeKeyword : pneumatic-hold-down-clamps
Manufacturer : Generic
ModelName : Genericve29asokix-12
ModelNumber : Genericve29asokix-12
PartNumber : Genericve29asokix-12
ProductDescription : 1. This is a double‑acting clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can 200mm/s.
2. The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work.
3. The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder.
4. The hard protective layer is resistant to wear and and can be used in harsh working environments.
5. The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes.

Specification:
Condition: 100% Brand New
Item Type: Cylinder
Material: Aluminum Alloy
Color: As Pictures Shown
Optional Type: ACK63-90R, ACK63-90L
Inner Diameter: Approx. 63mm / 2.5in
Piston Rod Outer Diameter: Approx. 20mm / 0.8in
Action Type: Double Action
Working Medium: Air (filtered by a Filter Screen 40μm)
Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi)
Guaranteed Pressure Resistance: 1.5MPa (215psi)
Working Temperature (℃): -20-80
Operating Speed Range: Approx. 50-200mm/s 2-7.9in/s
Travel Tolerance Range: 1.0
Rotation Angle Tolerance Range: Approx. ±1.5°
Buffer Type: None
Take over Caliber: PT1/8
Installation and Use
1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke.
2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece.
3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder.
4. The medium used in the cylinder should be filtered by a filter 40μm before use.
5. When the cylinder is removed and not
ProductSiteLaunchDate : 2024-07-31T06:54:09.917Z
Size : ACK63-90L
UnitCount : 1