Cart 2 india

Specification
Brand : FTVOGUE
BulletPoint1 : Pneumatic Drive Design: The riveting tool adopts a pneumatic drive design, which is more labor saving, with fast riveting speed, tight riveting, and no machine crash.
BulletPoint2 : High Quality Body: The main body of the riveting gun is made of premium alloy steel material, which is sturdy and not easy to break.
BulletPoint3 : Humanized Design: This rivet nut gun is ergonomically designed, comfortable to grip, easy to operate, lightweight, fatigue after long term use.
BulletPoint4 : Hydraulic Pneumatic Riveter : This pneumatic rivet nut gun can be used for 5/32in, 3/16in, 1/8in, 3/32in rivet nuts.
BulletPoint5 : Applicable for: This pneumatic riveting gun is suitable for riveting nuts of various materials such as aluminum, copper, iron, stainless steel, etc.
Color : Red+black
ExternallyAssignedProductIdentifier1 : 0885911784658
ExternallyAssignedProductIdentifier2 : 885911784658
ExternallyAssignedProductIdentifier3 : 00843518016190
Hazmat : auto-grounding
IncludedComponents : General Tech Intl 2262855 "Steelgrip" Spring Clamp 9"
ItemName : Pneumatic Rivet Nut Gun for 5/32 3/16 1/8 3/32in - Ideal for DIY Projects
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 27 centimeters
ItemPackageDimensions_Width : 21 centimeters
ItemPackageQuantity : 6
ItemTypeKeyword : pneumatic-hold-down-clamps
Manufacturer : FTVOGUE
Material : Metal
ModelName : FTVOGUEaybm48h75x
ModelNumber : FTVOGUEaybm48h75x
NumberOfItems : 1
PackageLevel : unit
PartNumber : FTVOGUEaybm48h75x
Pattern : Solid
ProductDescription : Spec:
Item Type: Pneumatic Rivet Nut Gun
Material: Alloy steel
Working Air Pressure: 6.3-8kgf/cm²
Tensile Force: 135kgf (1.323kN)
Inlet Port: 1/4in
Pullable Core Rivet Specification: Approx. 4mm / 5/32in, 4.8mm / 3/16in, 3.2mm / 1/8in, 2.4mm / 3/32in
Pullable Core Rivet Material: Aluminum, aluminum alloy, steel, iron, stainless steel
How to Use:
1. Working air pressure: 6.3‑8kgf/cm².
2. Hydraulic oil grade 46#.
3. Before use, observe from the tail end of the rivet gun to ensure that the claw group is open and in a circular hole state, and that there are no foreign objects obstructing the rivet nut withdrawing channel before normal use.
4. The rear tube should be completely screwed into the oil piston rod, and then locked by reverse rotation with a locking nut. The front and rear tubes are also threaded and should be fully screwed in. If the brake ring clamp cannot align with the front and rear tubes at the same time, the front tube can be slightly rotated in the opposite direction to match the brake ring clamp. Attention: The front tube should not be loosened in the opposite direction by more than one circle.
5. It is recommended to clean the claw, front and rear tubes, and aluminum or iron filings inside the front tube every 10000 times after pulling.
6. After using the rivet gun for a long time, the stroke may be shortened and the rivet cannot be broken at once. Please supplement 46# anti wear hydraulic oil in a timely manner.
packing list:

1 x Pneumatic Rivet Nut Gun
2 x Wrench
2 x Hex Wrench
3 x Riveting Head
1 x Oil Bottle
1 x Pin

Notice:


ProductSiteLaunchDate : 2023-12-24T00:00:00.000Z
SafetyDataSheetUrl : https://ace.infotrac.net/getmsds.aspx?SKU=2015588
Size : 30pcs
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1