Specification Brand : 911 motorsports BulletPoint1 : Tub NOT included - Comes with long reach clamp, plasma table frame & cutting slats. This round plasma table will sit on top a 55 gallon drum or common wash tub and includes an adjustable clamp to hold our Plasma Stencils and cutting guides. BulletPoint2 : Clamp option - 5/8" post for fixture/weld tables. Edge clamp style for our table & standard fab. tables up to 9/16" thick. The clamp is perfect for holding our Plasma Stencils and straight edges. BulletPoint3 : Fits standard 55 gallon drums or Behrens 17 gal. wash tub -NOT included- which are in stock at most farm & hardware stores for around $35. BulletPoint4 : All of the sparks/slag and most of the smoke is captured with 6" air gap above the water. The usable cutting area is 22" or 24" with the 17 gal tub. Cutting slats are 1/8" x 1 1/2" flat bar. Requires welding, about 10 minutes. BulletPoint5 : Made in USA! IncludedComponents : Pressure Gauge ItemName : Round - Plasma Cutter Water Table for 55 gal. drum/ 17 gal. tub - 5/8" Post ItemPackageDimensions_Height : 4.5 inches ItemPackageDimensions_Length : 26 inches ItemPackageDimensions_Width : 4.75 inches ItemTypeKeyword : plasma-cutting-equipment Manufacturer : 911 motorsports Material : Material ModelName : RWUDVq6ae1dm9ih ModelNumber : RWUDVq6ae1dm9ih NumberOfItems : 1 PartNumber : PT330-P PowerSourceType : Corded Electric ProductDescription : The Round Table will sit on top of a 55 gallon drum or Behrens 17 gal. wash tub that is filled with water, this creates a very economical and effective Plasma Table. All of the sparks/slag and most of the smoke is captured with a 6" air gap above the water. We include an adjustable clamp to firmly hold a straight edge, guide and our Plasma Stencils. This allows you to use both hands for guiding your plasma cutter to make precise cuts. The usable cutting area is 22". ProductSiteLaunchDate : 2023-05-18T11:11:53.532Z Style : 5/8" Post SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1 Voltage : 240 volts