Cart 2 india

Specification
Brand : AmicoPower
BulletPoint1 : Professional 80-Amp pilot arc non-touch plasma cutter torch assembly. The cutting torch head is made of high quality material and is easy to start an arc with good flame retardation.
BulletPoint2 : AP-80 Plasma Cutting is characterized with high cutting speeds, high precision, good cutting effects, and small thermal deformation.
BulletPoint3 : 13-feet 80-Amp plasma torch assembly. The max severance thickness is 1.5 inches, 239 psi air pressure, 60% duty cycle at 80 Amps, and the post flow is 60 sec. recommended.
BulletPoint4 : Specially customized for AMICO CHF-50 CHF-60 CUT-50HF CUT-60HF & APC-40HF APC-50HF APC-60HF APC-70HF APC-80HF.
BulletPoint5 : Commercial/Industrial class, 60% Duty cycle at 100 amps
BulletPoint6 : Clean, smooth cuts and improved consumable life with the new Italian designed iPT 100M torch
BulletPoint7 : Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
BulletPoint8 : Pilot arc improves performance and cutting on dirty, painted, or rusted metals
BulletPoint9 : 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
Color : Green
ExternallyAssignedProductIdentifier1 : 0039339473605
ExternallyAssignedProductIdentifier2 : 039339473605
IncludedComponents : Comes as a Combo Set
ItemDisplayWeight : 4 pounds
ItemName : Amico AP-80HF, 80-Amp Pilot Arc Plasma Torch, Use for CHF-50/60 & APC-50HF/60HF/70HF/80HF
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemTypeKeyword : plasma-cutting-equipment
Manufacturer : Amico Electric
Material : Copper
ModelNumber : AP-80HF Torch
PartNumber : AP80HF2020
PowerSourceType : AC 95~260V / 50~60Hz
ProductDescription : AP-80HF, 80-Amp Professional Pilot Arc Plasma Torch, Use for CHF-50/60 & APC-50HF/60HF/70HF/80HF. Professional 80-Amp pilot arc non-touch plasma cutter torch assembly. The cutting torch head is made of high quality material and is easy to start an arc with good flame retardation. AP-80 Plasma Cutting is characterized with high cutting speeds, high precision, good cutting effects, and small thermal deformation. 13-feet 80-Amp plasma torch assembly. The max severance thickness is 1.5 inches, 239 psi air pressure, 60% duty cycle at 80 Amps, and the post flow is 60 sec. recommended. Specially customized for AMICO CHF-50 CHF-60 CUT-50HF CUT-60HF & APC-40HF APC-50HF APC-60HF APC-70HF APC-80HF.
ProductSiteLaunchDate : 2020-06-12T07:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
Voltage : 220 volts