Cart 2 india

Specification
Brand : 911 motorsports
BulletPoint : Sold on Amazon
BulletPoint1 : Weld our kit together, then bolt onto your 30"x16" service cart (NOT included). Seal it up, add water and then you will have the best plasma table roll-around available for hand-held plasma cutting. Actual outside dimensions of finished table and cart are 29.25”L x 15.125”W x 35.5"H.
BulletPoint2 : Does *NOT* include sevice cart or plasma cutter - Requires Harbor Freight #62179 - 30"x 16" service cart, will potentially work with other brands - Includes - long reach clamp, plasma table ends, cutting slats, 4" F.B. sides, wave break, (4) cord holders, drain plug & new hardware.
BulletPoint3 : Clamp option - 5/8" post for fixture/weld tables. Edge clamp style for our table & standard fab. tables up to 9/16" thick. The clamp is perfect for holding our Plasma Stencils and straight edges.
BulletPoint4 : Cutting slats are 1/8" x 1 1/2" flat bar with progressive spacing, tight in the middle and wider toward the sides. 3 gallons of water leaves 5 1/2" of air space to limit splash back. The included wave break also prevents splashing when rolling around.
BulletPoint5 : Made in USA!
BulletPoint6 : ✅In the box: ‎MIG Stick 221 Welding machine, 200 Amp MIG gun and consumable kit, Argon/CO2 regulator, Electrode holder set, Ground clamp set, Gas welding hose, Drive rolls.
ExternallyAssignedProductIdentifier : 8903706623196
ExternallyAssignedProductIdentifier1 : 0662310135959
ExternallyAssignedProductIdentifier2 : 662310135959
IncludedComponents : inc
ItemDisplayDimensions_Height : 17 inches
ItemDisplayDimensions_Length : 25 inches
ItemDisplayDimensions_Width : 16 inches
ItemName : 30"x 16" Plasma Cutter - Water Table Conversion Kit - 5/8" Post
ItemPackageDimensions_Height : 4.5 inches
ItemPackageDimensions_Length : 30.25 inches
ItemPackageDimensions_Width : 8.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : plasma-cutting-equipment
Manufacturer : 911 motorsports
Material : Alloy Steel
ModelName : Gasless Nozzle
ModelNumber : 027664
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfShelves : 3
NumberOfWheels : 4
PackageLevel : unit
PartNumber : PT420-POST
PowerSourceType : PowerSource
ProductDescription : Our new plasma table is simple to weld together and bolt on a common 30"x16" steel service cart. Then seal up the top shelf, add water, along with the included wave break... and now you have the best roll-around water table for your hand held plasma cutter! 3 gallons gives 1 1/2" of water with 5 1/2" of air space which minimizes splashing while containing the mess. We also include an adjustable clamp to hold our Plasma Stencils or straight edges. The edge clamp style uses a 3D printed spacer, 1/8" for our table and other thickness are available to match your table. The weld post/fixture table style has a 5/8" post and we include bushings that get welded to our plasma table.
ProductSiteLaunchDate : 2023-05-21T04:55:26.131Z
RecommendedUsesForProduct : Outdoor
Size : 5-PK
Style : 5/8" Post
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudience : Unisex Adult
UnitCount : 1