Cart 2 india

Specification
Brand : Speedway Motors
BulletPoint : Price For: Each Max. Pressure: 300 psi @ 150 Degrees F WOG Fittings Sub-Category: Reducers Saturated Steam Pressure: 150 psi Body Material: Galvanized Malleable Iron Item: Reducer Class: 150 Connection Type: FNPT Standards: ASTM A-197, ASTM A47, ASME B16.3 and B16.4, UL Listed, FM Approved, NSF-61 and AB1953 Listed Pipe Size: 4" x 3" Country of Origin (subject to change): China
BulletPoint1 : Constructed from 7/8" OD .065" wall thickness tubing and zinc plated for corrosion resistance
BulletPoint2 : Has 5/8"-18 threads with RH threads in one end and LH threads in the other which allows easy length adjustment by spinning the tube
BulletPoint3 : The knurled section provides extra grip when spinning tube for adjustment
BulletPoint4 : Available in 4" to 29.5" lengths, most in 1-inch increments, to suit a variety of applications
BulletPoint5 : Comes swage formed on each end for the ultimate combination of weight and strength
Color : White
ConnectorType : Adapter
Department : Unisex-Adult
ExteriorFinish : Galvanized
ExternallyAssignedProductIdentifier : 7440139442914
ExternallyAssignedProductIdentifier1 : 0096942719759
ExternallyAssignedProductIdentifier2 : 096942719759
ExternallyAssignedProductIdentifier3 : 00742979308564
GradeRating : Grade 304
ItemName : Swedged Steel Tube for 5/8-18 Thread Rod Ends, 7/8 OD, 18.5 Inch Long
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 787
ItemShape : adapter
ItemTypeKeyword : plumbing-pipes
Manufacturer : Speedway Motors
Material : Alloy Steel
ModelName : Speedway Motors
ModelNumber : 57000040440
NominalWallThickness : 0.65 inch
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 91034258-18.5
ProductDescription : Zinc plated steel tube with .065-inch wall thickness for four-link, control arm, and other chassis uses. Suitable for Panhard rod, drag link, chassis bracing, and more. Ends threaded 5/8-18 LH and RH threads for rod ends or clevises of your choice. Available in 28 lengths from 4-inches to 29-1/2-inches long, most in 1-inch increments. Outside diameter of tube is .875-inch (7/8-inch) IMCA approved component. Thin wall construction with swedged ends offers lighter weight than comparable non-swedged tubes. Single rotation will adjust the overall length in or out by approximately 1/8-inch. Knurled surface to aid in rotating the tube to make required adjustments. Order by actual length measurement required for application. Swedged Tubing Provides Similar Strength with Less Weight Weight is the enemy of a race car. Any time you can save weight without reducing integrity or creating an unsafe situation you will benefit. Utilizing thin wall steel tubing for such things as control arms, Panhard bars, steering linkage, and more are all great ways to not only save weight but allow your suspension and steering to react faster to changes in the track surface, which ultimately keeps your race car’s tires in contact with the racing surface for precise throttle, braking, and steering control that can put you in the winner’s circle. One easy way to save weight is to replace heavy wall steel suspension and steering tubes with thin wall steel versions that utilize a swedged end. Swedged tubing is the perfect upgrade to these suspension and steering pieces when sized properly for the application. Swedging the ends of the steel tubing shrinks the outside diameter down, which thickens the wall of the tubing in the area where threads are created for the heim joint, bushing, or clevis end piece to be installed. This critical area is cold formed, which further strengthens the steel tube
ProductSiteLaunchDate : 2017-09-15T17:01:16.578Z
SafetyDataSheetUrl : https://ace.infotrac.net/getmsds.aspx?SKU=4807772
Size : No Size
StreetDate : 2017-03-18T00:00:01Z
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 40142000