Cart 2 india

Specification
Brand : Fafeicy
BulletPoint1 : CORROSION RESISTANT: Made of good quality aluminum material, corrosion resistant, no rust, with good strength
BulletPoint2 : GOOD AIR TIGHTNESS: Pneumatic manifold air distribution block is easy to install, no air leakage, possess good air tightness
BulletPoint3 : WIDELY USED IN ENGINEERING PROJECTS: Widely used in engineering projects such as factories, automation equipment, auto repair, electronics and electrical engineering
BulletPoint4 : HIGH PRESSURE RESISTANCE: Working pressure from 0~0.9Mpa(0~0.92kfg/cm²), pressure resistance is 1.0MPA (10kgf/cm²), possess high pressure resistance
BulletPoint5 : FOR AIR PUMPS: Air coupler fast connector is used for compressors, air pumps and some machines, etc., very practical
ItemName : Pneumatic Manifold Air Distribution Block Connector Splitter - G1/2 Input G1/4 Output 30x30mm(SY30-02-3F)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : plumbing-pipes
Manufacturer : Fafeicy
Material : material
NumberOfPieces : 1
PartNumber : Fafeicyaqb5rfwzku2636-11
ProductDescription : Item Type: Pneumatic Manifold Air Distribution Block
Material: Aluminum
Pressure Resistance: 1.0MPA(10kgf/cm²)
Working Pressure: 0~0.9Mpa(0~0.92kfg/cm²)
Adaptation Temperature: 0~60℃
Model Total Length(approx.) Positions/Holes Length x Width(approx.) Main Air Pipe Branch Branch Center Hole Diameter Mounting Hole Diameter Vertical Mounting Hole Center Spacing Horizontal Mounting Hole Center Spacing SY30-02-3F 106mm / 4.17in 3 Position 5 hole 30 x 30mm / 1.18 x 1.18in G1/2 (approx.20mm / 0.79in) G1/4 (approx. 12mm / 0.47in) Approx.32mm / 1.26in Approx.5.2mm / 0.2in Approx.20.5mm / 0.81in Approx.32mm / 1.26in SY30-02-4F 138mm / 5.43in 4 Position 6 hole Approx.64mm / 2.52in SY30-02-5F 170mm / 6.69in 5 Position 7 hole Approx.96mm / 3.78in

Package List:
1 x Pneumatic Manifold Air Distribution Block

Note:
1. Do not unplug and insert the air pipe frequently during the use of the connector, which will affect the service life of the connector and air pipe.
2. The pipe inserted into the joint needs to be inserted to the bottom of the joint to avoid the possibility of air leakage.
3. When pulling out the air pipe, first confirm that there is no pressure in the tube, press the end cap of the joint to the end and pull out the air pipe.

ProductSiteLaunchDate : 2022-02-22T07:54:40.165Z
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 40141700