Cart 2 india

Specification
Brand : PEX GUY
BulletPoint : 2" Schedule 40 Pipe
BulletPoint1 : Alpha PEX-A Tubing with Oxygen Barrier can be used for radiant heating systems for both residential and commercial applications. PEX A has the tightest bend radius to eliminate fittings and easier installation.
BulletPoint2 : NSF certified for Radiant Heating (North America Certification)
BulletPoint3 : NSF Certified, SDR 9 Standard, ASTM F876/877, 30 Year Industry Standard Warranty
BulletPoint4 : Pressure ratings: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F by PPI
BulletPoint5 : This can even be used with the F1960 expander-style (Uponor/Wirsbo) fittings as well as other popular PEX fitting systems (see list below).
BulletPoint6 : Footage marked every 2 to 5 feet on tubing
Color : Red
ExternallyAssignedProductIdentifier1 : 812039028746
ExternallyAssignedProductIdentifier2 : 0812039028746
ExternallyAssignedProductIdentifier3 : 00812039028746
IncludedComponents : PEX Pipe
ItemLength : 40 inches
ItemName : PEX GUY PEX-A Pipe with Oxygen Barrier EVOH (Red) For Radiant Heating (1" x 300 ft)
ItemPackageDimensions_Height : 100.33 centimeters
ItemPackageDimensions_Length : 6.096 centimeters
ItemPackageDimensions_Width : 8.128 centimeters
ItemPackageQuantity : 6
ItemShape : Round, Pipe
ItemTypeKeyword : plumbing-pipes
Manufacturer : PEX GUY
Material : PEX
MaximumPressure : 200 pounds_per_square_inch
ModelName : AR
ModelNumber : 1" x 300 ft
NominalWallThickness : 0.154 inches
NumberOfItems : 1
PackageLevel : unit
PartNumber : AR
ProductDescription :

PEX-A Tubing with Oxygen Barrier by PEX GUY can be used for radiant heating systems for both residential and commercial applications. NSF Certified to ASTM Standard ensure that it meet or exceeds USA quality standards. This can even be used with the F1960 expander-style (Uponor/Wirsbo) fittings as well as other popular PEX fitting systems (see list below).

PEX-A is manufactured using the “Engel” method which results in the highest degree of crosslinking around 85 percent. PEX-A can be repaired with the use of a heat gun. The higher degree of crosslinking of PEX-A also offers greater durability in freeze/thaw cycles, keeping the integrity of the pipe intact. This material is rated for direct burial and poured concrete installations.

Suitable for applications such as:
Snow Melting systems
Baseboard or Radiator systems
Thick/Thin poured concrete slabs
Solar Heating / Geothermal systems
Water to Air Heat Exchanger systems
Direct Burial Indoor/Outdoor Wood Boilers
Staple up and/or Staple down installations
Engineered Floors / Modular Wood Engineered Floors
Underneath the sub-floor (between floor joist) with or without heat plates
Compatible with: Uponor/Wirsbo Expander System, Crimp and Cinch Fittings systems, Push-Fit Fitting systems

Certifications and Ratings:
SDR 9 sizing standard
DIN 4726 (European Standard)
30 year industry standard warranty
CSA 137.5 (Canadian Certification)
Manufactured to meet/exceed ASTM 876/877 standards
Pressure ratings: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F by PPI

Compatible with:
Expander Fitting Systems - F1960 (Uponor/Wirsbo)
Compression Fitting Systems
Crimp Fitting Systems
Cinch/Pinch and Clamp Fitting Systems
Sharkbite Fitting and other similar systems
Press-Fit Fitting Systems
ProductSiteLaunchDate : 2016-08-26T07:00:00.000Z
Size : 1 5/8" x 1.75"
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40142000