Cart 2 india

Specification
Brand : Charlotte Pipe
BulletPoint1 : White fittings that are used in potable water applications only
BulletPoint2 : Intended for pressure use
BulletPoint3 : For use where systems will not exceed 140° F
BulletPoint4 : PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines
BulletPoint5 : MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA.
Color : White
ConnectorType : Cross
CustomerPackageType : Standard Packaging
Department : Unisex-Adult
ExteriorFinish : PVC
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Steel
ExternallyAssignedProductIdentifier : 4989999017373
ExternallyAssignedProductIdentifier1 : 611942038794
ExternallyAssignedProductIdentifier2 : 0611942038794
ExternallyAssignedProductIdentifier3 : 00804595955048
FinishType : Powder Coated
IncludedComponents : unit
ItemDisplayDimensions_Length : 30 inches
ItemDisplayWeight : 75.63 ounces
ItemLength : 2 feet
ItemName : CHARLOTTE PIPE 1/2 SCH 40 90 DEGREE STREET ELL MPTXS PRESSURE (1 Unit Piece)
ItemPackageDimensions_Height : 5.207 centimeters
ItemPackageDimensions_Length : 2.6924 centimeters
ItemPackageDimensions_Width : 3.9116 centimeters
ItemPackageQuantity : 1
ItemShape : 1/2" MALE NPT THREAD + 1/2" SOCKET
ItemTypeKeyword : plumbing-pipes
Manufacturer : Charlotte Pipe
Material : Polyvinyl Chloride
MaximumPressure : 220 pounds_per_square_inch
MeasurementSystem : Inch
MetalType : Stainless Steel
ModelName : CHARLOTTE PIPE - 611942038794 - 1/PACK
ModelNumber : CHARLOTTE PIPE - 611942038794 - 1/PACK
NominalWallThickness : 0.133 inches
NumberOfItems : 1
NumberOfPieces : 1
OperationMode : 手動式
PackageLevel : unit
PartNumber : PVC 02306 0600HA PC
Pattern : Opposite Side Dimensions (mm): 10.0
ProductDescription : 4 Inch diameter Clear PVC pipe (Schedule 40), Cut to Length.
PVC pipe is measured by the nominal inside-diameter (ID), not the outside-diameter (OD).
Pipe has an approximate ID of 4.0 inch and an approximate OD of 4.5 inch, per PVC Schedule 40 Specifications. As with all extruded pipe, the inside diameter can vary a little. Tolerance for the inside diameter is +/- 2% of the stated diameter.
This pipe is manufactured in strict compliance to ASTM D1785.
Pipe has a bluish tint to prevent yellowing from UV light (as seen in pictures).
For use with standard PVC fittings and PVC cement.
If using with an end cap, be sure to use a Schedule 40 or Schedule 80 cap and not a sewer and drain cap (DWV). A DWV cap will not fit as it is made to be used with thin-walled drainage pipe.
This pipe should be protected from the sun. Extended exposure to ultraviolet light may cause discoloration and the heat may cause warping.
Length Tolerance: +/- 1/16 Inch
Please note that there is no product packaging with this product, it is just the pipe itself.
Pipe weight: 30.25 oz. per foot.
Do not use PVC pipe with compressed air or gases as it can cause the pipe to explode and create shrapnel.
Item quantity is 1 piece.
How to cut: If you need to cut the pipe, use a saw such as a hacksaw, miter saw or radial arm saw.
ProductSiteLaunchDate : 2013-11-16T00:17:09.682Z
SafetyDataSheetUrl : HTTP://GLOBAL.CHARLOTTEPIPE.COM/TECHNICAL/MATERIAL SAFETY DATA/SDS_PVC_PIPE_FITTINGS.PDF
Size : 1/2 Inch ( EACH qty: 1 )
Style : Pack of 1
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700