Cart 2 india

Specification
Brand : Charlotte Pipe
BulletPoint : Price For: Each Max. Temp.: 140 Degrees F Item: Pipe Length: 8 ft. Material: PVC Color: Clear Schedule: 40 Connection Type: Plain End Standards: ASTM D.1784, NS14-14, FDA Regulations 175.300, 178.2650, 178.3790 Max. Pressure: 140 psi Pipe Size: 2" Country of Origin (subject to change): United States
BulletPoint1 : ConnecTite joints are over 20 times faster to install than a solvent cement joint
BulletPoint2 : No solvent cement or primer so no mess. Better for human health and saftey
BulletPoint3 : ConnecTite can be repositioned for proper alignment and pitch
BulletPoint4 : ConnecTite is for non-pressure applications where the temperature will not exceed 140° F. All Charlotte Pipe products are manufactured in the USA
BulletPoint5 : MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA.
Color : White
Color1 : Black
Color2 : Blue
Color3 : Yellow
ConnectorType : Tee
CustomerPackageType : 1
Department : Unisex-Adult
ExteriorFinish : Polyvinyl Chloride
ExternallyAssignedProductIdentifier : 7427127218072
ExternallyAssignedProductIdentifier1 : 611942138050
ExternallyAssignedProductIdentifier2 : 0611942138050
ExternallyAssignedProductIdentifier3 : 00611942138050
IncludedComponents : CHARLOTTE PIPE 1 1/2 CONNECTITE Sanitary TEE DWV (Drain, Waste and Vent) (1 Unit Piece)
ItemName : CHARLOTTE PIPE 1 1/2 CONNECTITE Sanitary TEE DWV (Drain, Waste and Vent) (1 Unit Piece)
ItemPackageDimensions_Height : 14.732 centimeters
ItemPackageDimensions_Length : 8.89 centimeters
ItemPackageDimensions_Width : 13.97 centimeters
ItemPackageQuantity : 1
ItemShape : 1-1/2" Hub + 1-1/2" Hub + 1-1/2" Hub
ItemTypeKeyword : plumbing-pipes
Manufacturer : Charlotte Pipe
Material : Polyvinyl Chloride
ModelName : CHARLOTTE PIPE 1 1/2 CONNECTITE Sanitary TEE DWV (Drain, Waste and Vent) (1 Unit Piece)
ModelNumber : CTT 00400 0800
NominalWallThickness : 0.8 month
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : CTT 00400 0800
ProductDescription :

HYDRAFOREW-25S

Manual Pipe Bender (3/8" - 1", 10-25 mm) with Box

An ideal tool for accurate bending of mild steel tubes up to 1800, Ø10-25mm, wall thickness 0.8-2.0mm.

Technical parameters:Model:W-25SPipe diameter range (in):3/8" - 1"Bending formers (in):3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1"Pipe wall thickness (in):0.03 - 0.08Weight (lbs):54
ProductSiteLaunchDate : 2017-11-01T08:00:01.000Z
SafetyDataSheetUrl : HTTP://GLOBAL.CHARLOTTEPIPE.COM/TECHNICAL/MATERIAL SAFETY DATA/SDS_PVC_PIPE_FITTINGS.PDF
Size : 1 1/2 Inch ( EACH qty: 1 )
StreetDate : 2017-11-01T00:00:01Z
Style : Sanitary Tee
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700