Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads
BulletPoint2 : Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable
BulletPoint3 : Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and
BulletPoint4 : Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
BulletPoint5 : 5 PieceSpecifications
Color : No box
ExternallyAssignedProductIdentifier : 6442176096427
IncludedComponents : no
ItemName : Carbon Steel NPT Pipe Tap Set 5 Piece
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 27 centimeters
ItemPackageDimensions_Width : 14 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : pipe-taps
Manufacturer : 212 Main
ModelName : Haofyspkg0n2gy3
ModelNumber : Haofyspkg0n2gy3
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : ZX9WHL8089
PowerSourceType : AC/DC
ProductDescription : dwtpt Series Qualtech carbon steel pipe Tap is designed to clean and/or rethread damaged or jam pipe threads. It is appropriate for Threading a wide variety of materials both ferrous and nonferrous. The nominal size of a pipe Tap is that of the pipe fitting to be tapped, not the actual size of the Tap. The thread tapers 0.75 of an inch per foot. All pipe taps furnished with a 2.5 to 3.5 thread chamfer. Npt threads require the use of a sealer like non-Stick tape or pipe compound. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round with square end shank. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in Shallow cuts. RightHand cut tools have a cutting action that engages when they are run in a clockwise direction. Features. Carbon steel Pipe taps are designed to clean and or rethread damaged or Jam Pipe threads. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts. Righthand cut tools have a cutting action that engages when they are run in a clockwise direction. 5 PieceSpecifications. Finish Uncoated. Material Carbon Steel. Style NPT. Cutting Direction Right Hand. Size 1/8, 1/4, 3/8, 1/2 3/4. Weight 1.2 lbs
ProductSiteLaunchDate : 2025-05-14T21:05:26.241Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 5
UnspscCode : 27110000